1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    PCI-1285E Economic DSP-based 4/8-axis Stepping and Servo Motor Control Universal PCI Card 經濟型基於DSP的4/8軸步進和伺服馬達控制通用PCI卡
    看原圖
    		Advant-PCI-1285E

    商品編號: Advant-PCI-1285E

    PCI-1285E Economic DSP-based 4/8-axis Stepping and Servo Motor Control Universal PCI Card 經濟型基於DSP的4/8軸步進和伺服馬達控制通用PCI卡

    PCI-1285E

    Economic DSP-based 4/8-axis Stepping and Servo Motor Control Universal PCI Card

    經濟型基於DSP的4/8軸步進和伺服馬達控制通用PCI卡

    產品特色
    • Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
    • Pulse output up to 5 Mpps
    • Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
    • Supports E-Gear (only for PCI-1245E)
    • Hardware emergency input
    • Watchdog timer
    • Position latch via ORG & index signal
    • Programmable interrupt
    • RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

     

    PCI-1245E-AE PCI-1285E-AE
    General Power Consumption Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A Typical: 5 V @ 530 mA 3.3 V @ 160 mA; Max.: 5 V @ 500 mA 3.3 V @ 1 A
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F) -20 ~ 85°C (-4 ~ 185°F)
    Bus Universal PCI V2.2 Universal PCI V2.2
    Dimensions 175 x 100 mm (6.9" x 3.9") 175 x 100 mm (6.9" x 3.9")
    Connector 1 x 100-pin SCSI Female Connector 2 x 100-pin mini-SCSI female connector
    Encoder Interface Isolation Protection 2,500 VDC 2,500 VDC
    Input Type Quadrature (A/B phase) or up/down Quadrature (A/B phase) or up/down
    Input Range 5 ~ 15 V 5 ~ 10 V
    Max. Input Frequency 10 MHz under 4xAB mode 10 MHz under 4xAB mode
    Pulse Type Motion Control Motor Driver Support Pulse-type servo/stepping Pulse-type servo/stepping
    Number of Axis 4 8
    Interpolation 2-axis linear 2 to 8-axis linear
    Max. Output Speed 5 Mbps 5 Mbps
    Step Count Range ±2, 147, 483, 646 ±2, 147, 483, 646
    Pulse Output Type Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type) Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
    Position Counters Range of command and actual position Range of command and actual position
    Velocity Profiles T-Curve, S-Curve T-Curve, S-Curve
    Machine Interfaces LMT+, LMT-, ORG LMT+, LMT-, ORG
    Servo Driver Interfaces ALM, INP ALM, INP
    General Digital I/O 16-ch DI, 16-ch DO 32-ch DI, 32-ch DO
    產品料號 說明 Get Quote
         
    PCI-1285E-AE CIRCUIT BOARD, Economic 8-Axis DSP-Based SoftMotion Controller
     
    PCI-1245E-AE CIRCUIT BOARD, Economic 4-Axis DSP-Based SoftMotion Controller  

    PCI-1245E/1285E is a 4/8-axis economic universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for entry-level applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). PCI-1245E/1285E utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2~8-axis linear interpolation, E-Gear (only for PCI-1245E), T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.

    PCI-1245E/1285E是一款4/8軸經濟的通用PCI（同時支持3.3 V和5 V信號插槽）步進/脈衝型伺服電機控制卡專為入門級應用而需要控制直線插補，電子齒輪，連續輪廓（圓軌道和經銷商的混合除外）。 PCI-1245E/1285E採用高性能DSP和FPGA來計算運動軌跡，多軸和輸入/輸出處理提供功能同步定時控制，如2〜8軸直線插補，電子齒輪（僅適用於PCI-1245E），T / S曲線加速/減速速度，速度倍率，16家模式等。此外，研華提供共通的動態API庫，圖形化的工具和用戶友好的範例以減少編程的工作量，幫助用戶完整的配置和診斷容易。