3M™ Round Conductor Flat Cable for Link Connector
0.100", 19 AWG Stranded, PVC 79100 Series
• Designed for factory automation applications
• Recommended for use with 3M™ Link Connectors
• 19 AWG [0.75 mm2] on 0.100" [2.54 mm] centers
     permits IDC termination
• RoHS Compliant. See the Regulatory Information
     Appendix (RIA) in the “RoHS compliance” section
     of www.3Mconnector.com for compliance
     information. (RIA E1 & C1 apply)
　

Physical
Insulation:
Material: Heat Resistant Polyvinyl Chloride (PVC)
Color: Black, Red, White, Green
Marking: 3M Cable 79100-075-4F1 0.75 mm2 x 4
                 E118773-K (UL) CL2 4C19AWG 90C **
                 (** indicates production lot code)
Conductors:
Description: 0.75 mm2 [19 AWG], 30 strands x 0.18 mm [33 AWG], Tinned Stranded Copper
Mating Connectors: Link Connector, 38104-0018-000 FL, TS-2098
Electrical
Voltage Rating: CL2 (UL 13)
Insulation Resistance: >1 x 1010 Ω / 10 ft [3 m]
Withstand Voltage: 1,500 VAC for one minute
Unbalanced Balanced
Characteristic Impedance: 67.36 Ω 114.24 Ω
Capacitance @1 MHz: 23.64 pF/ft (77.56pF/m) 13.49 pF/ft (44.27pF/m)
Inductance: 0.11 uH/ft (0.35uH/m) 0.18 uH/ft (0.58uH/m)
Propagation Delay: 1.59 ns/ft (5.22ns/m) 1.54 ns/ft (5.06ns/m)
Velocity of Propagation: 63.80% 65.90%
Note: Unbalanced is measured between ground signal – ground conductors. Balanced is measured between conductors within a pair.
Environmental
Temperature Rating: CL2, 90°C Max
Flammability Rating: CL2 (UL 13)
UL File No. E118773-K