3M™ Pleated Foil Shielded Cable
.025" 30 AWG Solid, TPE Primary, PVC Jacket 90101 Series
• Compatible with IDC mass termination connectors
• Functions with applications requiring standard
     impedance of 100 Ω balanced (differential)
• Extremely low crosstalk, used in the all-signal mode
     to quadruple signal density as compared to standard
     .025 inch flat ribbon cable
• Solid pleated copper foil provides flexibility and
     35 db average shielding effectiveness
• CL2 rated, rugged design and high reliability for
      peripheral applications
• See the Regulatory Information Appendix (RIA) in
     the “RoHS compliance” section of
     www.3M.com/Interconnect for compliance
     information (RIA E1 & C1 apply)

Physical
Jacket: Material: Polyvinyl Chloride (PVC)
Color: Gray
Primary Material: Thermoplastic Elastomer (TPE)
　

Marking:
Standard: (UL) CL2 75C 30 AWG 3M NU C AWM IIA/B 80C 150V FT1 EU < 50V
Conductors: 30 AWG [ 0.254 ] Tinned Solid Copper
Shielding: Solid, Pleated, Copper Foil
　

Electrical
Voltage Rating: USA: N.E.C. 725, CL2 Canada: 150V EU: < 50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced Balanced 53 Ω 104 Ω
Capacitance: 28.4 pF/ft [ 93.2 pF/m ] 14.5 pF/ft [ 47.6 pF/m ]
Inductance: 0.08 μH/ft [ 0.26 μH/m ] 0.16 μH/ft [ 0.52 μH/m ]
Propagation Delay: 1.52 ns/ft [ 4.99 ns/m ] 1.51 ns/ft [ 4.95 ns/m ]
Velocity of Propagation: 67% 67%
Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating.
　

Environmental
Temperature Rating: USA: CL2: 75°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2