Description
AMP NETCONNECT Category 6 patch panels exceed TIA/EIA-568-B.2-1 and IEC 60603-7-4
requirements for Category 6 component performance. The AMP NETCONNECT Category 6 System
complies with all of the performance requirements for current and proposed applications such as Gigabit
Ethernet, 100BASE-Tx, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, analog (broadband,
baseband) and digital video and analog and digital (VoIP) voice. The universal wiring label permits field
installation to either T568A or T568B wiring while simplifying ordering and inventory. The "6-pack"
modules accept 9mm and 12m labels (included) as well as color-coded icons. The jacks may be
individually replaced if necessary.

Specification (Text in brackets [ ] requires a choice.)
Category 6 patch panels shall be [insert height] high and provide [insert number of ports] modular jack
ports, wired to [T568A or T568B]. Patch panels shall be configured as 6-port modules with individually
replaceable jacks. The front of each module shall be capable of accepting 9mm to 12mm labels. Each
port shall be capable of accepting an icon to indicate its function. Patch panels shall terminate the
building cabling on 110-style insulation displacement connectors. The installed system shall comply with
the Category 6 performance characteristics listed in the following table [insert table from back page].
Patch panels must be UL Listed under file number E81956. Patch panels shall be AMP NETCONNECT
part number [insert AMP NETCONNECT part number] or an approved equivalent.