1. Loose Tube Type 鬆式型光纖纜線
    Self-Supporting Type 自持型光纖纜線
    Tight Buffer (Break-out) Type 緊式型光纖纜線
    Special Standarder Type 特殊安規型光纖纜線
    FTTH 光到府型光纖纜線
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > Loose Tube Type 鬆式型光纖纜線

    TLD-SL-F Series Compact Loose Central Tube Fiberoptic Cable 單素管型鬆式光纖纜線
    看原圖
    		TLD-SL-F

    進口Teldor SL系列單套管or束管型室內外通用鬆式光纖纜線
    (依照中華電信標準分為單套管or束管PJF類)
    APPLICATIONS
    • Both indoor and outdoor
    • Ducts, aerial installations and direct burial (armored option)
    • Distribution and general purpose cables

    CABLE DESCRIPTION
    The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. A wide range of jacket options is available: UV-stabilized PVC, halogen-free flame-retardant material, polyethylene with corrugated anti-rodent steel armoring, a jacket incorporating a sealed aluminum tape, and more. A ripcord is located under the jacket to facilitate jacket removal. A Fig-8 self-supporting cable is available in all fiber-counts.

    BENEFITS
    • Small diameter and lightweight
    • Cost-effective
    • Wide operating temperature range
    • Wide range of jacket options

    MECHANICAL PROPERTIES
    Typical properties are given in the Mechanical Properties Table. Actual properties depend on the cable construction.

    OPTICAL PROPERTIES
    See the Optical Properties Table.

    MATERIALS
    See information about the materials used in the Teldor Fiberoptic Cables.

    STANDARDS
    • Cables tested according to TIA/EIA-455 and IEC-60794-1-2. For details see Test Methods Table.
    • Cables meet or exceed Telcordia (Bellcore) requirements for outside plant cables (GR-20) when the appropriate options are chosen
    • Cables ordered with HFFR jackets meet IEC- 60332-1 standard.
    • On request cables meeting the IEC-60332-3 can be supplied.

    MARKING
    Cables are marked as follows
    Teldor - Fiberoptic Cable - Cable Code - RoHS - Length in Meters
    or per customer request.
    Fig-8 Self-supported cables do not comply with ROHS.

    CABLE DIMENSIONS AND WEIGHTS
    See list of most frequently ordered cables next page.

    ORDERING
    You can find the desired cable in the cable list next page or compose your own cable from the Cable Code Definition
    and Selection Guide. Standard cable lengths vary with cable diameter. Other constructions, color codes and materials may be available. Please contact the Teldor Marketing Department.

    Typical Mechanical Properties
    Max. Pulling Load 1500 N or the equivalent of the cable weight per km, whichever is higher
    Max. Operating Load 60% of the Max. Pulling Load
    Max. Compressive Load For all SLA cables: 3000 N For all SLB cables: 4000 N
    Repeated Impact 4.4 N.m (J) 3 x 2 impacts
    Minimum Bending Radius for Installation 20 times the cable O.D.
    Minimum Long Term Bending Radius 20 times the cable O.D. for armored cables, 10 times the cable O.D. for unarmored cables
    Twist (Torsion) — Length 180°x10 times , 125 times the cable O.D.
    Cyclic Flexing 25 cycles for armored cables 100 cycles for unarmored cables
    Operating Temperature Range -20°C to +70°C (With PE jacket)
    Storage Temperature Range -40°C to +70°C (With PE jacket)

    線材剖面
    下單資訊