商品編號: SYSTIMAX-CAT6A-Cord
Commscope-GS10E GigaSPEED® X10D Modular Patch Cord CAT-6A 網路配線跳線
GS10E GigaSPEED® X10D Modular Patch Cord
The high performance GS10E modular patch cord family has a
patent pending plug design featuring a distinctive aqua sled and
anti-snag latch for easy and rapid field identification. The GS10E
plug exhibits a dramatic reduction in variation of performance
via the innovative plug design. As soon as the cordage enters
the plug from the rear, pairs are controlled and the untwisting of
pairs and nesting of conductors required in conventional plugs is thus avoided.
The GS117-10E cord is a single-ended version of the GS10E GigaSPEED X10D patch cord.
Patch cords are orderable using a 14-character feature configuration coding scheme which replaces the familiar 9-character
Material ID. This allows maximum flexibility for ordering many different combinations of plug ends, cordage types, colors and
lengths. Please use SYSTIMAX Copper Patch Cord Product Identifier (in Copper Reference Section) for ordering information or contact
your SYSTIMAX BusinessPartner.
Features and Benefits:
• Electrical performance guaranteed to meet or exceed
the channel specifications of the proposed TIA
“Augmented Category 6” and ISO/IEC “Class EA” up
to 500 MHz when used as part of a GigaSPEED X10D
channel in registered SYSTIMAX installations
• Can support network line speeds up to at least 10 Gbps
• Certified component of an integrated GigaSPEED X10D
Solution
• Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel
Physical Specifications:
Contact Material: Phosphor Bronze
Contact Plating: Gold 50 micro-inch (1.27 microns), nickel 100 microinch
(2.54 microns)
Insertion Life: 750 minimum
Plug Material: Polycarbonate UL-rated 94 V-O
Operating Temperature: 14°F to 140°F (-10°C to 60°C)
Electrical Specifications:
UL and cUL: CM (cordage)
SYSTIMAX SOLUTIONS - GigaSPEED X10D SOLUTION
保證通道性能
1. |
10Gb/s UTP電纜佈線通道解決方案應專為支援10GBASE-T應用距離達100m設計,還應支援其他最新的多Gbps應用。 |
2. |
10 Gb/s UTP 解決方案應具備改良的來自外部電纜或連接頭線對的外來串擾Alien NEXT,可在不降低內部通道傳輸性能的情況下降低來自外來的串擾。 |
3. |
UTP 通道應具備高級 Alien NEXT性能、改良的插入損失性能以及保證通道性能達500 MHz。應保證已安裝的最多達4連接頭、長度達100m的UTP通道的Alien NEXT 性能。 |
4. |
應保證最差情況“6包1”通道配置的通道性能 (包括Alien NEXT 性能)。 |
5. |
6類/E級界限1至250MHz的通道插入損失餘量應保證為5%,外推6類/E級界限1至500MHz的通道插入損失餘量應保證為2%。 |
6. |
6類/E級界限1至250MHz的通道NEXT餘量應保證為6 dB,外推6類/E級界限1至500MHz的通道NEXT餘量應保證為1 dB。 |
7. |
6類/E級界限1至250MHz的通道PSNEXT餘量應保證為7.5 dB,外推6類/E級界限1至500MHz的通道PSNEXT餘量應保證為2.5 dB 。 |
8. |
外推6類/E級界限1至500MHz的通道ELFEXT 餘量應保證為6 dB。 |
9. |
外推6類/E級界限1至500MHz的通道PSELFEXT餘量應保證為8 dB。 |
10. |
外推6類/E級界限1至250MHz的通道回傳損失應保證為3dB,通道回傳損失應滿足外推6類/E級界限1至500MHz。 |
11. |
生產商應提供設計及安裝指南,保證滿足最小保證性能餘量。 |
電氣參數 |
符合ISO/IEC 11801 : 2002 “Class E” (1-250 MHz)的保證 通道餘量 |
符合草擬ISO/IEC 11801 Edition 2.1“Class EA” (1-500 MHz)的保證通道餘量 |
插入損失 |
5% |
2% |
NEXT |
6 dB |
1 dB |
NEXT PSNEXT |
7.5 dB |
2.5 dB |
ELFEXT |
6 dB |
6 dB |
PSELFEXT |
8 dB |
8 dB |
RETURN LOSS |
3 dB |
0dB |
PSANEXT |
N/A |
0dB |
|
|
|
|