MGS500 Series GigaSPEED® X10D Information Outlet
The MGS500 information outlet, the latest result of many years continuous product
development at SYSTIMAX Labs, features patented crosstalk cancellation and
compensation techniques. The MGS500 connectivity, consistent at the panels and
outlet, exhibit huge improvements in high frequency crosstalk enabled via new
PWB (Printed Wiring Board) materials and compensation technology. In addition,
large improvements in connector Alien Crosstalk mitigation have been achieved
through new materials and PWB compensation enhancements. This connector
design excellence has been made possible by the SYSTIMAX Labs Connector Field Pattern Modeling
technology, coupled with the system level MDM tool enabling high frequency cross coupling effects to be eliminated.
Features and Benefits:
• Electrical performance guaranteed to meet or exceed the
channel specifications of the propsed TIA “Augmented
Category 6” and ISO/IEC “Class EA” up to 500 MHz when
used as part of a GigaSPEED X10D channel in registered
SYSTIMAX installations
• Snaps into standard SYSTIMAX M-Series faceplates,
surface-mount boxes, consolidation point boxes,
SYSTIMAX Universal Modular Panel (UMP) or FlexiMAX
panels. Can also be mounted either at 90 degrees
(straight) or 45 degrees (angled) in any SYSTIMAX
faceplate
• Universal design and label supports both T568A & B wiring
• IDC connector terminations on rear of base allow quick
and easy installation of 22 to 24 AWG cable
• Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel
Physical Specifications:
Dimensions: HxWxD: 0.8 in x 0.8 in x 1.2 in (2.0 cm x 2.0 cm x 3.1 cm)
Universal A/B labeling
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14°F to 140°F (-10°C to 60°C)
Storage Temperature: -40°F to 158°F (-40°C to 70°C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Types: All plastic insulates, including: PVC, irradiated PVC,
Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug
SYSTIMAX SOLUTIONS - GigaSPEED X10D SOLUTION
保證通道性能
1. |
10Gb/s UTP電纜佈線通道解決方案應專為支援10GBASE-T應用距離達100m設計,還應支援其他最新的多Gbps應用。 |
2. |
10 Gb/s UTP 解決方案應具備改良的來自外部電纜或連接頭線對的外來串擾Alien NEXT,可在不降低內部通道傳輸性能的情況下降低來自外來的串擾。 |
3. |
UTP 通道應具備高級 Alien NEXT性能、改良的插入損失性能以及保證通道性能達500 MHz。應保證已安裝的最多達4連接頭、長度達100m的UTP通道的Alien NEXT 性能。 |
4. |
應保證最差情況“6包1”通道配置的通道性能 (包括Alien NEXT 性能)。 |
5. |
6類/E級界限1至250MHz的通道插入損失餘量應保證為5%,外推6類/E級界限1至500MHz的通道插入損失餘量應保證為2%。 |
6. |
6類/E級界限1至250MHz的通道NEXT餘量應保證為6 dB,外推6類/E級界限1至500MHz的通道NEXT餘量應保證為1 dB。 |
7. |
6類/E級界限1至250MHz的通道PSNEXT餘量應保證為7.5 dB,外推6類/E級界限1至500MHz的通道PSNEXT餘量應保證為2.5 dB 。 |
8. |
外推6類/E級界限1至500MHz的通道ELFEXT 餘量應保證為6 dB。 |
9. |
外推6類/E級界限1至500MHz的通道PSELFEXT餘量應保證為8 dB。 |
10. |
外推6類/E級界限1至250MHz的通道回傳損失應保證為3dB,通道回傳損失應滿足外推6類/E級界限1至500MHz。 |
11. |
生產商應提供設計及安裝指南,保證滿足最小保證性能餘量。 |
電氣參數 |
符合ISO/IEC 11801 : 2002 “Class E” (1-250 MHz)的保證 通道餘量 |
符合草擬ISO/IEC 11801 Edition 2.1“Class EA” (1-500 MHz)的保證通道餘量 |
插入損失 |
5% |
2% |
NEXT |
6 dB |
1 dB |
NEXT PSNEXT |
7.5 dB |
2.5 dB |
ELFEXT |
6 dB |
6 dB |
PSELFEXT |
8 dB |
8 dB |
RETURN LOSS |
3 dB |
0dB |
PSANEXT |
N/A |
0dB |
|
|