Tool-less Category 6/5E Keystone Jacks

 

NEX1's Keystone Jacks feature tool-less; non-PC board design. They guarantee a defective-free environment and meet/exceed ANSI/EIA/TIA 568A (TSB-40A); ISO/IEC 11801 connector requirements for high performance, reliable transmission service.

Features:

• Hassle-free, tool-less installation
• Easy to terminate, compact jack design
• Exceeds requirements in NEXT TIA/EIA 568-A test procedures
• Twists are maintained to within 1/2" (12.7mm). Per Category 6 installation requirements
• Work in standard Keystone opening
• Small high-density configuration, so you can mount mor jacks in plates
• Beryllium copper contacts for superior connectivity
• 採用UL-94V 耐震、抗摔、滯燃性ABS塑鋼材質
• 接觸針材質為鈹銅：以100-μ鎳為底層、覆上純50-μ鍍金處理
• 插拔壽命：1,000次(最少) / I.D.C. 部分250 次(最少)
• 接觸針與接頭接觸力：100 g.
• 相容線徑：IDC (Insulation Displacement Connector) 22~26 AWG wires
• 接頭承受力：17 公斤(最小)
• 接觸針彈性設計，與接頭完全密和
• 內附防塵蓋，隔絕塵埃及濕氣
• FCC Part 68, UL 認證

　

1. Fits wire gauges between 0.5mm - 0.65mm (22-24AWG)
2. Can be re-terminated a minimum number of 10 times. 0.5mm solid cable mis-conductivity might occur once 0.65mm solid cable has been terminated.
3. Can be used for connecting digital voice telephone system.
4. Avoid using under high temperature and high humidity environments.
5. Stop the installation when lighting or the power source is switched on.