Bare copper, stranded to DIN VDE 0295 and
IEC 60228, fine or extra fine wires,
cl.5 or cl.6, BS 6360 cl.5 or 6,
up to 0,34 mm² cl.5, above 0,5 mm² cl.6
TPE-E core insulation
Black cores continuous white numbering
acc. to DIN VDE 0293 + gnye
Construction as above, but 0,5 (1,5) mm²
cores screened with aluminium-coated
polyester foil
Part no. 72214
Construction as above, but 0,5 mm² pair
screened with tinned twist screen
Part no. 77265, 77266, 77269, 77270
Construction as above, but 1,0 mm² pair
only, screened with tinned twist screen
Part no. 77469
Construction as above, but
6 cores, 1,5 mm², screened with tinned
twist screen
4 pairs, 0,25 mm², screened with tinned
twist screen
Sheath colour: orange (RAL 2003)
with meter marking
Properties
PUR outer sheath, low adhesion, abrasion
resistant, halogen-free, resistant to UV, oil,
hydrolysis and microbial attack
The smooth, high-grade core insulation,
together with special stranding configuration
and slide wrapping ensure long service life
under combined bending and torsional
stresses
AWG sizes are approximate equivalent
values. The actual cross-section is in mm²
Application
These cables are specially designed for combined torsional and bending stresses. They are employed both for power supply and for the transmission of control and monitoring signals. ROBOFLEX® cables are used in assembly and welding robots, in handling and automation centres, in transport and conveyor equipment, and on turntables and swivel tables. In other words, anywhere where there is no defined cable routing with only alternating bending cycles on a single plane such as in drag chains.
CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.