2KV-DLO

90°C • DLO Rated 2000V
CT Rated UL Listed as Type RHH/RHW-2
CSA Certified as RW90 • RoHS Compliant

Applications

DLO is especially suited to supply power to traction motors of diesel-electric locomotives. It is also recommended as a portable cable for drilling rigs, on-shore or off-shore, railroad and transit car wiring, electric earth-moving equipment, in shipyard applications, arc welder supply leads, power and control jumper cable, telcom power supply and motor leads. The cable is suitable for use in wet or dry areas, conduits, ducts, troughs or trays, and where superior electrical properties are desired. The maximum continuous conductor temperature for normal operation is 90°C in wet or dry locations. DLO resists oils, acids, alkalines, heat, flame, and has abrasion resistance.

Specifications

• Made in accordance with UL and CSA Standards
• MSHA accepted (P-07-KA090026-MSHA)
• RoHS Compliant
• UL listed as Type RHH-RHW-2 per UL 44
• CSA Certified as Type RW90 1kV per C22.2 No.38
• Meets FT-4 / IEEE 1202 and VW-1 Flame Tests
• Oil Resistant / Sunlight Resistant / -40°C

Construction

Electro Wire DLO Cables are manufactured in sizes 14 AWG through 1111.0 KCMIL with stranded tinned annealed copper. A paper or polyester tape separates the conductor from the EPDM rubber insulation to aid in stripping. A black, heavy duty CPE sunlight resistant jacket is extruded over the insulation.