宜大電線有限公司

產品搜尋

分　類：
關鍵字：

首頁 > 宜大-Computer Cable(儀表電腦網路訊號傳輸電纜線)> Computer-Cable > INDUSTRIAL IP67 Net Work CABLING 工業級網路佈線產品

DuraMAX Cat.5e UTP Industrial Keystone Jack 工業級IP-67, RJ45, 網路線防水接頭

YEIDA-1305-03055

YEIDA-1305-03055
DuraMAX Cat.5e UTP Industrial Keystone Jack 工業級IP-67, RJ45, 網路線防水接頭

YEIDA DuraMAX-67TM industrial grade products provide the same transmission performance as all other twisted-pair connectors, with the durability to withstand harsh industrial environments typical to factory floors, chemical, food processing plants, etc.

DuraMAX-67TM IP67-rated keystone jack housing design guarantees excellent protection against liquid and solid agents penetration. It protects against the effects of industrial vibrations, and allows for a extended life and reliable performance.

The keystone jacks are standard component level jacks, with the same level of high performance and covered by our warranty program when installed by a certified installer.

Keystone Jack Features

Meets Cat.5e channel performance requirements specified in ANSI/TIA-568-2.D
110 type IDC termination
Accepts 22~26AWG, stranded or solid wire
Modular jack meets FCC part 68 | Wiring: T568A/B

Applications

10BASE-T (IEEE 802.3)
16Mbps Token Ring (IEEE802.5)
100VG-AnyLAN (IEEE802.12)
100BASE-T Ethernet (IEEE802.3)
155/622Mbps 1.2/2.4 Gbps ATM

Standards Conformance

UL Verified
ISO/IEC11801 2nd edition
ANSI/TIA Standard 568-2.D
CENELEC EN 50173

IP67 Jack Housing Features

Endures high UV, humidity, oily and acidic environments
Meets IP67 standard | Meets UL 1863 compliant
Operating Temperature : -25ºC to 70ºC
A durable and fully enclosed design

Ordering Information
Product Number	Product Name	Category	UTP/FTP	IP Rating
1305-03055	DuraMAX-67TM Cat.5e UTP Component Level Keystone Jack	Cat.5e	UTP	IP67
1305-03054	DuraMAX-67TM Cat.5e FTP Component Level Keystone Jack	Cat.5e	FTP	IP67
1305-04050	DuraMAX-67TM Cat.6 FTP Component Level Keystone Jack	Cat.6	FTP	IP67
1305-04051	DuraMAX-67TM Cat.6 UTP Component Level Keystone Jack	Cat.6	UTP	IP67

Technical Specifications
Physical Characteristics
Housing	High-impact, Flame Retardant, UL94V-0 rated, spring wire/contact blades
Contact Material	Phosphor bronze alloy
Contact Plating	24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel
Temperature Range	Storage: -40 to +70°C \| Operational: -10 to +60°C
Mechanical Characteristics
Total Mating Force	800 grams for a 8 wire leads minimum
Retention	30lbs min between the jack and plug
Insertion/Extraction Life	750 cycles minimum
Electrical Characteristics
Insulation Resistance between Conductors	500 MegaOhms min
Dielectric Withstanding Voltage	1000V, RMS, 60HZ, 1 MIN
Contact Resistance	20 MilliOhms max
Current Rating	1.5 AMPS at 20°C
DC Resistance	Max. 0.1 Ohms

Instructions

Strip off at least 1 inch of jacket from end of cable. Insert & terminate wires into IDC's according to the desired wiring configuration (T568B/T568A)	Place termination cap on jack and press cap to make sure it is fully seated	Adjust the cable to a suitable position in the opening of the cap

Faceplates come in 3 configurations: single, dual and quad sizes	Place the industrial connector into the faceplate from the back side of the plate	Use the large nut to fix the connector to the stainless steel plate

Screw the wall plate to the backbox in its correct orientation with the supplied screws	If attached the seal cover, mount the seal cover between the large nut and the face plate	Insert an industrial patch cord into the industrial connector to connect to a network. If not installing a plug, please place the seal cover on the outlet

keywords：DuraMAX Cat.5e UTP Industrial Keystone Jack 工業級IP-67, RJ45, 網路線防水接頭, UL94V-0 , UL1863, google, yeida, dintek,