YEIDA-1305-04050
DuraMAX Cat.6 FTP Industrial Keystone Jack 工業級IP-67, STP屏蔽隔離, CAT6, STP RJ45, 網路線防水接頭
DuraMAX-67TM industrial grade products provide the same transmission performance as all other DINTEK twisted-pair connectors, with the durability to withstand harsh industrial environments typical to factory floors, chemical, food processing plants, etc.
DINTEK’s DuraMAX-67TM IP67-rated keystone jack housing design guarantees excellent protection against liquid and solid agents penetration. It protects against the effects of industrial vibrations, and allows for a extended life and reliable performance.
The keystone jacks are standard DINTEK component level jacks, with the same level of high performance and covered by our warranty program when installed by a certified installer.
Keystone Jack Features
- Meets all Cat.6 channel performance requirements specified in ANSI/TIA-568-2.D
- 110 type IDC termination
- Accepts 22~26AWG, stranded or solid wire
- Modular jack meets FCC part 68 | Wiring: T568A/B
Applications
- 10BASE-T (IEEE 802.3)
- 16Mbps Token Ring (IEEE802.5)
- 100VG-AnyLAN (IEEE802.12)
- 100BASE-T Ethernet (IEEE802.3)
- 155/622Mbps 1.2/2.4 Gbps ATM
- 1000Mbps Gigabit Ethernet
Standards Conformance
- UL Verified
- ISO/IEC11801 2nd edition
- ANSI/TIA Standard 568-2.D
- CENELEC EN 50173
IP67 Jack Housing Features
- Endures high UV, humidity, oily and acidic environments
- Meets IP67 standard | Meets UL 1863 compliant
- Operating Temperature : -25ºC to 70ºC
- A durable and fully enclosed design
Ordering Information
|
Product Number
|
Product Name
|
Category
|
UTP/FTP
|
IP Rating
|
1305-04050
|
DuraMAX-67TM Cat.6 FTP Component Level Keystone Jack
|
Cat.6
|
FTP
|
IP67
|
1305-04051
|
DuraMAX-67TM Cat.6 UTP Component Level Keystone Jack
|
Cat.6
|
UTP
|
IP67
|
1305-03054
|
DuraMAX-67TM Cat.5e FTP Component Level Keystone Jack
|
Cat.5e
|
FTP
|
IP67
|
1305-03055
|
DuraMAX-67TM Cat.5e UTP Component Level Keystone Jack
|
Cat.5e
|
UTP
|
IP67
|
Technical Specifications
|
Physical Characteristics |
Housing |
High-impact, Flame Retardant, UL94V-0 rated, spring wire/contact blades
|
Contact Material |
Phosphor bronze alloy
|
Contact Plating |
24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel
|
Temperature Range |
Storage: -40 to +70°C | Operational: -10 to +60°C
|
Mechanical Characteristics |
Total Mating Force |
800 grams for a 8 wire leads minimum
|
Retention |
30lbs min between the jack and plug
|
Insertion/Extraction Life |
750 cycles minimum
|
Electrical Characteristics |
Insulation Resistance between Conductors |
500 MegaOhms min
|
Dielectric Withstanding Voltage |
1000V, RMS, 60HZ, 1 MIN
|
Contact Resistance |
20 MilliOhms max
|
Current Rating |
1.5 AMPS at 20°C
|
DC Resistance |
Max. 0.1 Ohms
|
Instructions
|
|
|
|
Strip off at least 1.2 inches of jacket from end of cable. Wrap the drain wire around the cable. Press the wires through the projecting portion of terminals until fixed
|
Terminate wires with punch down tool. Make sure the tool cuts off the excess wires. Place the cap on the jack and press to make sure it is fully seated
|
Put the hinged side cover into the slot. Then snap the side cover to the jack
|
|
|
|
Fix the cable tie to the shielding lug. Cut the excess tie wrap off as close to the strain relief as possible
|
Place the industrial connector into the faceplate from the back side of the plate
|
Use the large nut to fix the connector to the stainless steel plate
|
|
|
|
Follow the direction of the nut and screw
|
Mount the screw cover/seal between the large nut and the faceplate
|
Secure the wall plate to back box in its correct location with the supplied screws. Insert industrial patch cord into the industrial connector to connect to a network
|
KEYWORDS;DuraMAX, Cat.6, STP, Industrial, Keystone Jack, 工業級, IP-67, RJ45, 網路線, 防水接頭, UL94V-0 , UL1863, google, yeida, dintek, 宜大電線
|