YEIDA-1305-04051
DuraMAX Cat.6 UTP Industrial Keystone Jack 工業級IP-67, UTP RJ45, 網路線防水接頭
DuraMAX-67TM industrial grade products provide the same transmission performance as all other DINTEK twisted-pair connectors, with the durability to withstand harsh industrial environments typical to factory floors, chemical, food processing plants, etc.
DINTEK’s DuraMAX-67TM IP67-rated keystone jack housing design guarantees excellent protection against liquid and solid agents penetration. It protects against the effects of industrial vibrations, and allows for a extended life and reliable performance.
The keystone jacks are standard DINTEK component level jacks, with the same level of high performance and covered by our warranty program when installed by a certified installer.
Keystone Jack Features
- Meets and exceeds ANSI/TIA-568-2.D
- 110 type IDC termination
- Accepts 22~26AWG, stranded or solid wire
Applications
- Voice; T1; ISDN
- 10GBASE-T
- 16Mbps Token Ring (IEEE802.5)
- 100VG-AnyLAN (IEEE802.12)
- 100BASE-T Ethernet (IEEE802.3)
- 155/622Mbps 1.2/2.4 Gbps ATM
- 1000Mbps Gigabit Ethernet
- 550MHz Broadband Video
Standards Conformance
- UL Verified
- ISO/IEC11801 2nd edition
- ANSI/TIA Standard 568-2.D
- CENELEC EN 50173
- Meets FCC part 68
IP67 Jack Housing Features
- Endures high UV, humidity, oily and acidic environments
- Meets IP67 standard | Meets UL 1863 compliant
- Operating Temperature : -25ºC to 70ºC
- A durable and fully enclosed design
Ordering Information
|
Product Number
|
Product Name
|
Category
|
UTP/FTP
|
IP Rating
|
1305-04051
|
DuraMAX-67TM Cat.6 UTP Component Level Keystone Jack
|
Cat.6
|
UTP
|
IP67
|
1305-04050
|
DuraMAX-67TM Cat.6 FTP Component Level Keystone Jack
|
Cat.6
|
FTP
|
IP67
|
1305-03054
|
DuraMAX-67TM Cat.5e FTP Component Level Keystone Jack
|
Cat.5e
|
FTP
|
IP67
|
1305-03055
|
DuraMAX-67TM Cat.5e UTP Component Level Keystone Jack
|
Cat.5e
|
UTP
|
IP67
|
Technical Specifications
|
Physical Characteristics |
Housing |
High-impact, Flame Retardant, UL94V-0 rated, spring wire/contact blades
|
Contact Material |
Phosphor bronze alloy
|
Contact Plating |
24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel
|
Temperature Range |
Storage: -40 to +70°C | Operational: -10 to +60°C
|
Mechanical Characteristics |
Total Mating Force |
800 grams for a 8 wire leads minimum
|
Retention |
30lbs min between the jack and plug
|
Insertion/Extraction Life |
750 cycles minimum
|
Electrical Characteristics |
Insulation Resistance between Conductors |
500 MegaOhms min
|
Dielectric Withstanding Voltage |
1000V, RMS, 60HZ, 1 MIN
|
Contact Resistance |
20 MilliOhms max
|
Current Rating |
1.5 AMPS at 20°C
|
DC Resistance |
Max. 0.1 Ohms
|
Instructions
|
|
|
|
Strip off at least 1 inch of jacket from end of cable. Insert & terminate wires into IDC's according to the desired wiring configuration (T568B/T568A)
|
Place termination cap on jack and press cap to make sure it is fully seated
|
Adjust the cable to a suitable position in the opening of the cap
|
|
|
|
Faceplates come in 3 configurations: single, dual and quad sizes
|
Place the industrial connector into the faceplate from the back side of the plate
|
Use the large nut to fix the connector to the stainless steel plate
|
|
|
|
Screw the wall plate to the backbox in its correct orientation with the supplied screws
|
If attached the seal cover, mount the seal cover between the large nut and the face plate
|
Insert an industrial patch cord into the industrial connector to connect to a network. If not installing a plug, please place the seal cover on the outlet
|
keywords:DuraMAX Cat.6 UTP Industrial Keystone Jack 工業級IP-67, RJ45, 網路線防水接頭, UL94V-0 , UL1863, google, yeida, dintek,
|