The twin tester provides instant identification of most common voice and data cabling problems including shorts, opens, reversals, and incorrect polarity.

The master and remote units separate for end-to-end testing of installed cabling or work separately as independent patch cord test units. Both pieces simply snap and lock together when not in use, making it easy to carry and store. Designed to fit neatly into a toolbox or pocket, the UTP tester has a convenient ‘ring’ feature for attaching to a belt or frame.

The UTP tester should be used to check each channel from the station device to the system.

孿生測試儀可立即識別最常見的語音和數據佈線問題，包括短路，斷路，反轉和極性錯誤。

主設備和遠程設備分開進行端到端的已安裝電纜測試，或作為獨立的跳線測試單元單獨工作。 不用時，兩個部件都可以簡單地卡扣並鎖定在一起，從而易於攜帶和存儲。 UTP測試儀經過精心設計，可整齊地放入工具箱或口袋中，並具有方便的“環”功能，可將其連接到皮帶或框架上。

UTP測試儀應用於檢查從站設備到系統的每個通道。

Features

• Innovative 2-in-1 design
• Features modular jacks for testing USOC and 568A/B cabling systems
• Accurately verifies the continuity and sequence of 1-,2-,3-, & 4-pairs
• Continuously-sequencing LED display provides a diagnostic readout
• Immediately detects shorts, opens, reversals, and mis-wires
• Simple snap and lock master and remote unit design
• Ergonomically designed hand-held unit
• Light weight, rugged, and impact-resistant
• Requires 9 volt alkaline battery (not included)

Function 1 - Patch Cord Test

Technical Specification

• Materials: ABS
• Distance: 1,000m (3,280ft)
• Power requirements: 9 volt battery (standard or alkaline)
• Weight: 240g (9 oz.)
• Built-in interface: USOC, EIA 568B
• Contact specification: 30 u” gold over nickel

Function 2 - End to End Test