IGUS-CF CRANE -Igupren 动力电缆 | 宜大電線有限公司

產品搜尋

分　類：
關鍵字：

首頁 > 歐規電纜線 & 配件LAPP/Igus/Nexans/Habia> IGUS-Chainflex® 高柔性電線電纜 > IGUS-Chainflex® 动力电缆

5055470

商品編號: IGUS-CF-CRANE

IGUS-CF CRANE -Igupren 动力电缆

用于高负载和高压应用

igupren外护套

耐油

阻燃

最小弯曲半径为: 10 xd

★★★★商品說明★★★★

Chainflex® CFCRANE 6/10 kv

1. Highly flexible special conductor
2. Extruded EPR insulation over conductive rubber
3. Highly flexible overall copper shield
4. Extruded, highly abrasion-resistant iguprene jacket blend
　

For maximum voltages and outputs
igupren outer jacket
Oil-resistant
flame-retardant

Classification of the Chainflex® cable:
Class 6.4.3
Requirements:
6: Cables for continuous movement in E-Chains® for ultimate heavy-duty use, for radii from 5 x d, speed up to 10 m/s
Travel distance:
4: unsupported and sliding up to 400 m and above
Resistance to oil:
3: Oil-resistant according to EN 60811-2-1, DIN EN 50363-10-2
　

★★★★使用操作說明★★★★

Chainflex® CFCRANE 6/10 kv


Cable design :
Protection cable :	without protective conductor
Outer diameter [mm]:	27
Copper index [kg/km]:	468
Weight [kg/km]:	940
Part No. :	CFCRANE1x25/16-6/10kV
Delivery time on request
Note: The mentioned external diameters are maximum values and may tend toward lower tolerance limits.

★★★★商品規格描述★★★★


	Temperature range moving	-20 °C to +80 °C, minimum bending radius 10 x d
	Temperature range fixed	-30 °C to +80 °C, minimum bending radius 7,5 x d
	v max. unsupported/gliding	10 m/s, 6 m/s
	a max.	50 m/s²
	Length of travel	Unsupported and sliding travel distances up to 500 m and over, Class 4
	UV-resistant	high
	Nominal voltage	6/10 kV (following DIN VDE 0250), other voltages upon inquiry.
	Test voltage	17 kV (following DIN VDE 0250, Part 813)
	Oil	Oil-resistant (following DIN EN 60811-2-1) Class 3.
	flame-retardant	According to IEC 332-1, CEI 20-35, FT1
	Silicon-free	Free from silicon which can affect paint adhesion (following PV 3.10.7 – status 1992).
	conductor	Highly flexible cable consisting of tinned copper wires (following VDE 0295).
	Core insulation	Inner and outer conductor layer made of conductive rubber. Insulating cover made of high-quality, heat-resistant and ozone-resistant ethylene-propylene-rubber (EPR)
	Entire shield	Extremely flexible, tin-plated copper shield. Shield about 80% optical.
	Outer jacket	Low-adhesion mixture on the basis of iguprene, especially abrasion-resistant and highly flexible, adapted to suit the requirements in Energy Chains® (following DIN VDE 0207 Part 21). Color: red
	CE	Following 2006/95/EG
	Lead-free	Following EU guideline (RoHS) 2002/95/EC

Typical application areas

for maximum load requirements
Almost unrestricted oil resistance
Indoor and outdoor applications, UV-resistant
Especially for freely suspended and gliding travel distances up to 500 m and more
Outdoor ship to shore, crane applications, conveyer technology