1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    > > >

    323-321-2001  PLTC 300 V PVC-PVC Overall Shielded Single And Multi Triad  Instrumentation Cable 3C對型 隔離儀俵控制電纜
    看原圖
    5258037

    商品編號: A-323-321-2001

    323-321-2001 PLTC 300 V PVC-PVC Overall Shielded Single And Multi Triad Instrumentation Cable 3C對型隔離儀俵控制電纜


    For use as instrumentation cable inside or outside incontrol applications. Suitable for installation in trays,troughs, channels, conduit, wireways and for aerialuse when supported by a messenger. Suitable forClass 2 and 3 electrical circuits per NEC Article 725.

    OVERALL SHIELDED
    SINGLE AND MULTI TRIAD
    PVC Insulation
    PVC Jacket
    105°C, 300 Volts


    APPLICATIONS:
    For use as instrumentation cable inside or outside in
    control applications. Suitable for installation in trays,
    troughs, channels, conduit, wireways and for aerial
    use when supported by a messenger. Suitable for
    Class 2 and 3 electrical circuits per NEC Article 725.
     

    SPECIFICATIONS:
    1. CONDUCTORS:
    Bare copper, Class B, concentric stranded.
    2. INSULATION: 105°C polyvinyl chloride (PVC).
    3. TRIADS: Each triad is twisted with a suitable lay to reduce magnetic interference and color
    coded black, white and red. Each triad is also printed numerically to ensure easy identification.
    4. ASSEMBLY: The individual triads are cabled together to form a substantially circular
    cross-section of the completed assembly. Overall aluminum/polyester foil shield with
    stranded tinned copper drain wire. All cables include a communication wire for
    calibration and a rip cord for jacket removal.
    5. OVERALL JACKET: Flame retardant, sunlight resistant, black polyvinyl chloride (PVC).
    6. STANDARDS: Meets Article 725 of the NEC for Type PLTC and UL 13.
    Finished cable meets IEEE 383 and UL 1581 vertical tray flame tests.
    6. TEMPERATURE: 105°C
    7. VOLTAGE: 300 Volts