1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)

    ANIXT-TYPE G-FLAT LEAD-CURED Heavy Duty EPR/Thermoset Jacket 90°C, 600/2000 Volts EPR扁平橡膠熱固熔機械馬達礦場用線 (軟質移動型)
    看原圖
    		5269343




    商品編號: ANIXT-LEAD-CURED-TypeG-FLAT

    ANIXT-TYPE G-FLAT LEAD-CURED Heavy Duty EPR/Thermoset Jacket 90°C, 600/2000 Volts EPR扁平橡膠熱固熔機械馬達礦場用線 (軟質移動型)

    Flexible, flat cable for use on loading machines,cutting machines, shuttle cars, and other portable ormobile equipment. Especially suited for use onequipment fitted with cable-reeling devices; wheretrailing cables are subject to run-over by otherequipment; or for safety grounding of equipment.



    ★★★★商品說明★★★★

    TYPE G-FLAT
    LEAD CURED
    Heavy Duty
    EPR Insulation
    Thermoset Jacket
    90°C, 600/2000 Volts
    　

    APPLICATIONS:
    Flexible, flat cable for use on loading machines,
    cutting machines, shuttle cars, and other portable or
    mobile equipment. Especially suited for use on
    equipment fitted with cable-reeling devices; where
    trailing cables are subject to run-over by other
    equipment; or for safety grounding of equipment.
    　

    SPECIFICATIONS:
    1. CONDUCTOR:     Rope-stranded, tinned copper.
    2. INSULATION: Ethylene propylene rubber (EPR).
    3. GROUND CONDUCTOR: Stranded, tinned copper.
    4. ASSEMBLY: Two insulated conductors and one ground wire, or three conductors and
    two ground wires, as specified, laid parallel, with thermosetting material between them
    as an integral part of the overall jacket.
    5. OVERALL JACKET: Lead-cured thermoset compound.
    6. STANDARDS: Meets the requirements of ICEA S-75-381 (NEMA WC58). Accepted by
    MSHA and marked with the manufacturer’s P number.
    7. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
    8. TEMPERATURE: 90°C
    9. VOLTAGE: 600/2000 Volts