1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)

    ANIXT-MPF-GC-5KV Mine Power Feeder  EPR/Thermoset Jacket 90°C Shielded 5kV, 8kV and 15kV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)
    看原圖
    5270833




    商品編號: ANIXT-MPF-GC-5KV

    ANIXT-MPF-GC-5KV Mine Power Feeder EPR/Thermoset Jacket 90°C Shielded 5kV, 8kV and 15kV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)


    Suitable for installation in boreholes, shafts,horizontal runs in underground tunnels, aerialsuspension on insulators and other semi-permanentmining and industrial feeder installations.



    ★★★★商品說明★★★★

    MPF-GC
    5kV
    Mine Power Feeder
    EPR Insulation
    Thermoset Jacket
    90°C Shielded
     

    APPLICATIONS:
    Suitable for installation in boreholes, shafts,
    horizontal runs in underground tunnels, aerial
    suspension on insulators and other semi-permanent
    mining and industrial feeder installations.
     

    SPECIFICATIONS:
    1. CONDUCTOR:
    Class B stranded bare copper. An extruded semi-conducting compound
    is applied over the conductor.
    2. INSULATION: Ethylene propylene rubber (EPR) per ICEA S-75-381 (NEMA WC58).
    3. SHIELD: An extruded semi-conducting compound is applied over the insulation. A flat
    copper tape is helically applied.
    4. COLOR CODE: Either printing or marker tapes applied under the copper tape.
    (Black, white and red.)
    5. ASSEMBLY: Insulated conductors, two tinned Class B stranded uninsulated ground
    wires, yellow insulated ground check wire and fillers are assembled with an overall
    polyester tape.
    6. OVERALL JACKET: Thermoset compound per ICEA S-75-381.
    7. STANDARDS: Meets the requirements of ICEA S-75-381. Accepted by MSHA, and
    marked with the manufacturer’s P number.
    8. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
    9. TEMPERATURE: 90°C
    10. VOLTAGE: 5kV, 8kV and 15kV