Used for control and power applications in chemical plants, steel mills, industrial plants, utility substations and generating stations, residential and commercial buildings.
May be used in Class 1, Div. 2 Hazardous Locations per NEC Art. 501. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable."
Suitable for aerial, duct or direct burial.

Power Cable
600 V Multiconductor

PVC-Nylon/PVC Tray Cable With Ground

PVC-nylon insulation
PVC jacket
UL Listed, Type TC
　

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, annealed bare copper per ASTM B3 and B8
2. INSULATION:Polyvinyl Chloride (PVC), nylon covered per UL 83 for Type THHN/THWN
3. COLOR CODE: Conductors are color coded per ICEA Method 4 (printed numbers)
4. ASSEMBLY: Insulated conductors are cabled with a single ground wire and fillers as necessary to make round
5. OVERALL JACKET: Sunlight-resistant Polyvinyl Chloride (PVC) per UL 1277
6. STANDARDS: Meets UL 1277 requirements for Type TC cables having THWN or THHN conductors. Cables are listed for direct burial and meet the IEEE 1202 and UL 1685,
70,000 Btu/hr flame tests
7. AMPACITY: Based on not more than three conductors in raceway or cable or earth per NEC Table 310.16 with a conductor temperature of 90°C and an ambient temperature of
30°C. All 4-conductor values have been derated per 2008 NEC Table 310.15(B)(2)(a)
8. TEMPERATURE: 90°C
9. VOLTAGE: 600 V

APPLICATIONS
Used for control and power applications in chemical plants, steel mills, industrial plants, utility substations and generating stations, residential and commercial buildings.
May be used in Class 1, Div. 2 Hazardous Locations per NEC Art. 501. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable."
Suitable for aerial, duct or direct burial.