Plenum-Rated
Individually Shielded Pairs
Low-Capacitance Computer Cables for EIA RS-232, EIA RS-422, and Digital Audio Applications

24 AWG Stranded (7x32) TC Conductors • Twisted Pairs • Individually Shielded w/Beldfoil® (100% Coverage) • 24 AWG Stranded TC Drain Wire
Plenum • Foam FEP Insulation • Gray Fluorocopolymer Jacket
300V RMS CMP FT6

Belden-89729  2P
Belden-89730  3P
Belden-89728  4P
Belden-89705  5P
Belden-89731  6P
Belden-89757  7P
Belden-89732  9P
Belden-89734  12P
Belden-89758  18P

Plenum • Foam FEP Insulation • Natural Flamarrest® Jacket
300V RMS CMP FT6

Belden-82729  2P
DCR = DC Resistance • TC = Tinned Copper
*Capacitance between conductors.
**Capacitance between one conductor and other conductors connected to shield.

Introduction

Belden® paired cable products are manufactured in a variety of gage
sizes, dimensions, insulation materials, shielding configurations,
and jacketing materials including Plenum and High-Temperature
versions to meet the technical requirements of many different types
of systems.
　

Paired cables allow balanced signal transmission, which results
in lower crosstalk through common mode rejection. Due to the
improved noise immunity of twisted pairs, they generally permit
higher data speeds than multi-conductor cables.
　

As an aid to proper cable selection, both the suggested working
voltages and the maximum temperature ratings are indicated for
each applicable paired cable selection.
　

Most of our paired cables are available from stock. Many of these
are available off the shelf from distributors. If you have a new or
unusual application or you cannot find a paired cable in this catalog
section that meets your technical requirements, contact Technical
Support at 1-800-BELDEN-1.
　

Paired Cables Packaging
Belden’s unique UnReel® cable dispenser is available for many
of the paired cable products listed in this section. The letter “U”
before the specified put-up length denotes UnReel packaging