| 商品編號: A-FSR100
FSR Ready Sleeve Firestop Sleeve (split firestop sleeve kit) 袖子狀防火套管(分割阻火套管套件)
FSR100 | 1 in. split firestop sleeve kit: includes one 1 in. (25 mm) split sleeve, two split escutcheon plates, two firestop gaskets, firestop putty and labels | | | FSR200 | 2 in. split firestop sleeve kit: includes one 2 in. (51 mm) split sleeve, two split escutcheon plates, two split firestop gaskets, firestop putty and labels | | | FSR400 | 4 in. split firestop sleeve kit: includes one 4 in. (102 mm) split sleeve, two split escutcheon plates, two split firestop gaskets, firestop putty and labels |
|
| |
| | |
玉山 / 台新 / 華南 / 萬泰 / 兆豐 / 遠東 / 新光 / 永豐 / 第一 / 彰化 / 合庫 / 日盛 / 匯豐 / 渣打國泰世華 / 台北富邦 / 大眾銀行 / 台灣中小企銀/台中商銀 / 澳盛銀行
| |
| | |
| | https://www.youtube.com/user/FIRESTOPAUTHORITY Ready™ split sleeves are used to protect or support cables in both non-rated and rated construction. Ready™ split sleeves are suitable for use in all common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10" (250 mm) thick. Ready™ split sleeves are a complete Ul® Classified out-of-the-box solution for new or existing cable penetrations through walls. each sleeve kit contains a precut split metallic sleeve, split mounting escutcheons, split intumescent escutcheon gaskets, wall warning labels, and the amount of putty required to seal both ends. Ready™ split sleeves are simple in design and installation. each trade size includes a unique rolled lip design to eliminate potential sharp edges and do away with the need for conduit bushings. Ready™ split sleeves are sized to the same O.d. as standard eMt (electrical Metal tubing) and will accept eMt accessories such as grounding bushings. additionally, Ready™ split sleeves provide an easy method for compliance with the sleeve attachment requirements of the 2000 iBC section 711.2 without the need for struts or other bracing.
aPPLIcaTIonS PRoducT deScRIPTIon PhySIcaL PRoPeRTIeS SPecIFIcaTIonS • Split design — For use with existing cables. • oversize openings — Ul tested for larger and irregularly shaped openings • Ready to Install — No cutting required, no waste! • Locks Into Place — No support struts and clamps required • no external firestop seal required — Factory supplied intumescent firestop gasket • Firestop Putty Provided with Kit — sufficient to seal ends to 1” (25 mm) depth • uL classified and code compliant • For Rated and non-Rated Barriers — putty seal impedes the passage of fire, smoke, superheated gases, particulate dust, and minimizes noise transmission FeaTuReS PRoducT daTa SheeT all data, video, communication, power, and control cabling shall be installed through sleeves wherever said cables penetrate fire resistance rated barriers. in the case of existing cable installation, a split sleeve device with corresponding split escutcheon plates to facilitate installation around existing cables shall be used. sleeves shall be sized to accommodate present cable bundle diameter as well as anticipated growth. split sleeve kit provided with intumescent gaskets and non-hardening intumescent firestop putty. When irregularly shaped openings are encountered, the split sleeve device shall be Ul tested and classified for this purpose. the split sleeve device shall be Ul Classified and tested to the requirements of astM e 814 (aNsi/Ul 1479). split sleeve kit shall be Ul tested in larger or irregularly shaped openings and include provisions for mounting device in such openings. SPecIFIed dIvISIonS division 7 07 84 00 through-penetration Firestopping division 26 26 00 00 electrical 8L98 PeRFoRmance Ready™ split sleeves are Ul tested and Classified in accordance with astM e814 (Ul1479). systems are available for cable penetrations through common wall constructions up to and including 4 hours. |
| |
|
|