1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    PCI-1220U 2-axis Stepping and Servo Motor Control Universal PCI Card 2軸步進和伺服馬達控制通用PCI卡
    看原圖
    		Advant-PCI-1220U

    商品編號: Advant-PCI-1220U

    PCI-1220U 2-axis Stepping and Servo Motor Control Universal PCI Card 2軸步進和伺服馬達控制通用PCI卡

    PCI-1220U

    2-axis Stepping and Servo Motor Control Universal PCI Card

    2軸步進和伺服馬達控制通用PCI卡

    產品特色
    • Independent 2-axis motion control
    • Hand wheel and jog function
    • 2-axis linear interpolation function
    • 2-axis circular interpolation function
    • Continuous interpolation function
    • Programmable T/S-curve acceleration/deceleration rate
    • Up to 4 Mpps output for each axis
    • Two pulse output types: CW/CCW or pulse/direction
    • Up to 1 MHz encoder input for each axis
    • Two encoder pulse input types: A/B phase or up/down
    • Constant speed control
    • Position management and software limit switch function
    • BoardID™ switch

     

    PCI-1220U-AE
     
     
    General Power Consumption Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F)
    Bus Universal PCI V2.2
    Dimensions 175 x 100 mm (6.9" x 3.9")
    Connector 1 x 50-pin SCSI Female Connector
    Advanced Function Servo On Output Channels 2
    Encoder Interface Isolation Protection 2,500 VDC
    Input Type Quadrature (A/B phase) or up/down
    Input Range 0~2 VDC for low; 5~30 VDC for high
    Max. Input Frequency 1 MHz
    Axes Linear Interpolation V
    2-axis Circle
    Interpolation    		 V
    Number of Axes 2
    Advanced Functions General Purpose
    DO Channels    		 8
    General Purpose
    DI Channels     		6
    Pulse Type Motion Control Motor Driver Support Servo/stepping
    Interpolation 2-axis linear, 2-axis circular
    產品料號 說明
       
    PCI-1220U-AE 2-axis Stepping and Servo Motor Control Universal PCI Card

     

    PCI-1220U is a 2-axis Universal PCI stepping/pulse-type servo motor control card. This card adopts NOVA MCX312 IC which supports 2-axis motion control with interpolations. Besides, functions like continuous interpolation, programmable T/S-curve acceleration/deceleration, constant speed control are also accomplished. For users that only need to drive two motors at most, PCI-1220U is a cost-effective solution than 4-axis motion control cards. The DLL driver for PCI-1220U together with the utility make it easy for users to test the functionalities of the card and to develop their own application.

    PCI-1220U是2軸通用PCI步進/脈衝型伺服電機控制卡。該卡採用NOVA MCX312芯片，它支持與插補2軸運動控制。此外，如連續插補，可編程T / S曲線加速/減速，恆速控制功能也完成了。對於用戶來說，只有需要驅動兩個馬達至多PCI-1220U比4軸運動控制卡具有成本效益的解決方案。對於PCI-1220U的DLL驅動程序與實用程序，很容易讓用戶測試該卡的功能和開發自己的應用程序。