此產品需要一英吋的板手來安裝緊固,詳細操作說明請洽詢CHARD操作說明
書;設計有測試點,可以不中斷電路連接來量測電路狀況,產品並且配有EPDM
橡膠成型的半導電封蓋,提供了良好的防水密封及半導遮蔽的效果。
訂購方式
15/25 kV絕緣塞頭本體 訂貨號: 25-IP600
15/25 kV絕緣塞頭本體+封蓋 訂貨號: 25-IP600C
15/25 kV絕緣塞頭本體+封蓋+雙頭螺栓 訂貨號: 25-IP600CS
另有900 A等級系列產品可供選購。
YEIDA 15kV and 25kV Class deadbreak accessories and replacement parts.
600A 15 and 25kV Class Deadbreak Accessories are used to connect and assemble 600A products to provide fully shielded and submersible connections. Chardons products meet all the requirements of IEEE Standard 386, and are fully interchangeable with competitors products that also meet IEEE standard 386.
Insulating Plug (Epoxy) and Cap
A one-inch socket and torque wrench are needed to tighten the insulating pug into a de-energized deadbreak connector and mating apparatus. Refer to Chardon instruction sheet for detail.
Capacitive test point allows circuit testing without interrupting the connection. The one inch-hex head provides easy assembly to the connector and mating parts.
A semi-conducting EPDM rubber cap fits over the insulating plug for a waterproof seal and deadfront shielding.
Connecting Plug (Epoxy)
A spanner wrench is used to tighten the connecting plug into a deenergized deadbreak connector or mating part.
A conductive coating around the center provides continuity of semiconducting shield with EPDM shield of mating parts. Holes in the part allow easy assembly using a spanner wrench.
Chard connecting plugs can be used for connecting 2 or more 600A deadbreak connectors.
Threaded Stud
The threaded stud is used with a T-Body connector or splices to connect reducing well plugs, deadbreak tap plugs, deadbreak tap plugs, connecting plugs, and insulating plugs to other components or apparatus bushings.
Compression connectors
Compression connectors are available in all aluminum, all copper for 900A applications), or bi-metal designs. All are available with threaded and unthreaded holes. See Conductor Code Table for proper application. All connectors are designed for use with either aluminum or copper conductors.
Cable Adapter (EPDM)
Molded cable adapter is available in sizes to fit cables from 0.640” to 1.985” in diameter (16.3 mm to 49.9 mm). The Chardon cable adapter is molded with high quality peroxide cured insulation and semiconductive