Lumberg AutomationTM flush-type connectors: For the construction of equipment, sensors and actuators, various receptacle connectors and connector inserts are available. Receptacle connectors to be used as panel feed-throughs are rated IP 67 when mated to the associated matching component. They are installed either from the front or from the rear in the device panel.
Receptacle connector, for rear mounting, M12 male connector, print contacts, chassis side thread PG 9 (panel nut RSKF 9), 4 poles, A coding
Product
M12 Receptacle connector, front mounting, solder connections - RSFM 3
RSFM 3
Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding.
Product
M12 Receptacle connector, for sensors - RSE 4
RSE 4
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole.
Product Variant
M12 Receptacle connector, for sensors - RSE 4 L
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, with ventilation hole Ø 2.0 mm .
Product
M12 Receptacle connector, front mounting, with stranded wire - RSFM 3/0,5 M
RSFM 3/0,5 M
Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16).
Receptacle connector, for rear mounting, M12 male connector, print contacts, chassis side thread PG 9 (panel nut RSKF 9), 4 poles, A...
Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3...
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation...
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation...
Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A...
Product
M12 Receptacle connector, front mounting with stranded wire, bus connectors - 0976 PMC 151
0976 PMC 151
Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5
Product
M12 Receptacle connector, panel feed through - FWD 5
FWD 5
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, A coding
Product
M12 Receptacle connector, panel feed through - FWD 5B
FWD 5B
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, B coding (suitable for PROFIBUS)
Product
M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PMC 152
0976 PMC 152
Receptacle connector, for front mounting, M12 connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus
Product
M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PFC 152
0976 PFC 152
Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus
Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable...
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, A...
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, B...
Receptacle connector, for front mounting, M12 connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially...
Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 –...
Receptacle connector, for front mounting, housing of stainless steel (especially designed for use in food processing equipment), M12...