.jpg)
M12 Receptacle Connectors
  Lumberg AutomationTM flush-type connectors: For the construction of equipment, sensors and actuators, various receptacle connectors and connector inserts are available. Receptacle connectors to be used as panel feed-throughs are rated IP 67 when mated to the associated matching component. They are installed either from the front or from the rear in the device panel.  M12 Receptacle connector, rear mounting, print contacts - RSHL 4/S 5,5RSHL 4/S 5,5Receptacle connector, for rear mounting, M12 male connector, print contacts, chassis side thread PG 9 (panel nut RSKF 9), 4 poles, A coding  M12 Receptacle connector, front mounting, solder connections - RSFM 3RSFM 3Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding.  M12 Receptacle connector, for sensors - RSE 4RSE 4Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole. M12 Receptacle connector, for sensors - RSE 4 LReceptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, with ventilation hole Ø 2.0 mm .  M12 Receptacle connector, front mounting, with stranded wire - RSFM 3/0,5 MRSFM 3/0,5 MReceptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16).
 M12 Receptacle connector, front mounting with stranded wire, bus connectors - 0976 PMC 1510976 PMC 151Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5  M12 Receptacle connector, panel feed through - FWD 5FWD 5Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, A coding M12 Receptacle connector, panel feed through - FWD 5BFWD 5BReceptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, B coding (suitable for PROFIBUS)  M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PMC 1520976 PMC 152Receptacle connector, for front mounting, M12 connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus  M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PFC 1520976 PFC 152Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus
| ||||||||||||||||||||||||||||||||||||||
