1. Lumberg- Cordsets double-ended and Data Cables 線組，雙端電纜和數據電纜
    Lumberg- I/O Systems Active - Modular
    Lumberg- T-Connectors and Adaptors 接頭轉換器
    Lumberg-Circular 7/8 Connectors接頭插座
    Lumberg-Circular M23 Connectors 接頭插座
    Lumberg-I/O Modules Activ - Stand Alone-AS-Interface
    Lumberg-I/O Modules Activ - Stand Alone-CANopen
    Lumberg-I/O Modules Activ - Stand Alone-DeviceNet
    Lumberg-I/O Modules Activ - Stand Alone-Industrial Ethernet
    Lumberg-I/O Modules Activ - Stand Alone-Interbus
    Lumberg-I/O Modules Activ - Stand Alone-Profibus
    Lumberg-M12 Circular Connectors M12連接器
    Lumberg-M8 Circular Connectors (for Actuators Sensors and Data)
    Lumberg-Passive Distributors (ASB Series)
    Lumberg-Fieldbus I/O Solutions 現場總線I / O解決方案
    Lumberg-Industrial Connectors 工業連接器
    Lumberg-Industrial Ethernet 工業以太網
    Lumberg-Power Connectors 電源連接器
    Lumberg-Stainless Steel Connectors 不銹鋼連接器
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > Lumberg-I/O Modules Activ - Stand Alone-Profibus

    Lumberg-0970 PSL 700 Modules with Digital Inputs and Outputs (DIO) universal 工業級乙太網應用數位輸出入接頭插座
    看原圖
    		30057356




    商品編號: Lumberg-0970-PSL-700

    Lumberg-0970 PSL 700 Modules with Digital Inputs and Outputs (DIO) universal 工業級乙太網應用數位輸出入接頭插座



    ★★★★商品說明★★★★

    Product description

    Type0970 PSL 700
    Order No.75514
    DescriptionProfibus-DP device with 16 digital I/O channels, channels can be used universally as inputs or outputs, combined FIXCON/M12 socket, rotary switches for addressing, M12 bus connection, 7/8“ power supply.
    DiagnosticsModule diagnostic and single channel diagnostic according to Profibus specification (please see operating instructions under www.lumberg-automation.com/downloads)
    NoteThe application of these products in harsh environments should always be checked before use.
    Color of housing black
    Product characteristicsOil resistance, Vibration resistance
    　

    Classification

    Belden classI/O Modules with Digital Inputs and Outputs (DIO) universal
    Belden brandLumberg-Automation
    　

    Mechanical data

    Weight380 g
    Dimensions (W x H x D)60 mm x 243 mm x 39.5 mm
    　

    Environmental conditions

    Environmental temperature-10 ºC ... 60 ºC
    Degree of protection (IP), mountedIP67
    　

    Materials

    Housing material / Molded bodyPBT
    　

    Approvals

    ApprovalsUL
    　

    Bus system

    Fieldbus systemProfibus DP
    Bus ConnectionM12
    Device Indentification09CA hex
    Transmission rate12 MBd
    Address range1 dec. ... 125 dec.
    Rotary address switches1 dec. ... 99 dec.
    Default address99 dec.
    　

    System power supply

    Nominal voltage (System power supply)24 V DC
    Voltage range DC (System power supply)19 V ... 30 V
    Power consumption (System power supply)120 mA
    Reverse polarity protection (System power supply)Yes
    　

    Sensors power supply

    Sensors power supplyUS
    Voltage range (Sensor power supply)min.(USystem - 1.5 V)
    Sensor current (at TU30°C) (Sensor power supply)200 per socket mA
    Short-circuit proof (Sensor power supply)Yes
    Indication (Sensor power supply)LED green
    　

    Actuator power supply

    Actuator power supplyUL Optional disengageable actuator low-voltage detection over integrated DIP-switch.
    Nominal voltage (Actuator power supply)24 V DC
    Voltage range (Output power supply)19 V ... 30 V
    Reverse polarity protection (Output power supply)Yes
    Indication (Output power supply)LED green
    　

    Inputs

    Input wiringType 3 acc. to IEC 61131-2
    Signal type (Inputs)Digital Inputs and Outputs
    Number of channels (Inputs)16
    Channel type (Inputs)N.O., p-switching
    Nominal input voltage24 V DC
    Channel status indicator (Inputs)LED yellow per channel
    Diagnostic indication (inputs)LED red per socket
    　

    Outputs

    Signal type (Outputs)Digital Outputs
    Number of channels (Outputs)16
    Channel type (Outputs)N.O., p-switching
    Nominal output current per channel1.6 A
    Short-circuit proof (Outputs)Yes
    Max. output current per module (Outputs)9 A (12 A Test proven and approved under the following conditions: looped through System/Sensorpower supply max. 2,5 A, Power supply cable STL 204 (5 x 1.00 mm2), Operating temperature range max. 40°C)
    Overload-proof (Outputs)Yes
    Channel status indicator (Outputs)LED yellow per channel
    Diagnostic indication (outputs)LED red per channel/socket
    　

    Scope of delivery and accessories

    Scope of deliveryDust covers M12 - 4 pieces, Attachable labels - 10 pieces
    　

    Pictures

    Image
    　

    Drawings

    Drawing
    　

    Downloads

    Pin assignment