| | |
| | Push-On Connectors
The push-on interconnect system relies on a floating female-to- female adapter—commonly referred to as a “bullet”—to enable stacking of boards equipped with male PCB connectors. 推進式連接器
推式互連系統依賴於一個浮動母對母轉接頭,通常被稱為“子彈頭”,使裝備與公的PCB連接器板堆疊 Multiport Connectors
Carlisle Interconnect Technologies has added several Multiport Connectors to the standard push-on interconnect interfaces to facilitate even higher packaging density for today’s RF/Microwave systems. 多埠連接器
卡萊爾互連技術增加了幾個多端口連接器的標準推入互連接口,方便了更高的封裝密度為當今的射頻/微波系統。 The product range consists of several 2-, 4- and 6-port board connectors, as well as, panel mount connectors that enable quick connect/disconnect of several RF connections at once. This helps reduce the form-factor of today’s packages, while simultaneously simplifying assembly time to reduce overall complexity of these systems. 產品範圍包括幾個2 - ,4 - 和6端口電路板連接器,以及,面板安裝連接器,使多個RF連接快速連接/斷開一次。這將有助於減少今天的軟件包的外形,同時簡化裝配時間,以降低整體這些系統的複雜性。 - Frequency Range: up to 30 GHz
- 50 Ω Impedance; Blindmateable configuration
- MIL-PRF-39012 compliant
- Low mating forces
- Board-mount and panel-mount configurations with complementary straight and right angle cable connectors
- Custom Multiport Solutions
| Metal | Specification | Center Pin/Body | BeCU (Beryllium Copper) | ASTM B 196 and/or ASTM B 19 | Brass | ASTM B 36, B121, B16, B16M | Inserts/Dowell Pins | Stainless Steel | ASTM A484/ A582 or A555/581 | Insulator | Virgin PTFE Flourocarbon | ASTM D 1710 and ASTM D 1457 | Polyamide-Imide | ASTM D5204 Group 2 Class 1 | Finish | Gold | ASTM-B488 Type 1, Class 1 | Nickel (50μ in. Typ.) | SAE AMS-QQ-N-290 | Passivation | ASTM A967 |
| Force to Engage | Force to Disengage | Limited Detent | Smooth Bore | Limited Detent | Smooth Bore | SMP | 7 lbs | 2 lbs | 3 lbs | 0.5 lbs | SSMP | 6.5 lbs | 2.5 lbs | 4 lbs | 1.5 lbs | WMP | 2.5 lbs | 1.5 lbs | 4.5 lbs | 1 lb | |
| |
|
|