Features

• Energy-efficient advanced thermal design enables cool operation at extended temperatures offers configurable dual hot-swappable power supplies for redundancy and increased reliability
• Exceeds IEEE 1613 and IEC 61850 Environmental Standards for Substation Automation Products
• Manages redundant ringswith the S-Ring software product, Spanning Tree Protocol (STP) andRSTP
• Highly configurable
• Next Generation 10 slot, 36 port configurability (10KT)
• Highly configurable managed Ethernet switch with up to 8 Gigabit ports and 16 100Mb ports (10KG)
• Precision timing using IEEE 1588 v2
• Industry First: dual hot-swap power supplies in a 1U or 1.5U package with Thermal Fins
• Substation Hardened and IEC 61850-3
• Power choices of AC/DC (90-250V), -48VDC, 24VDC power
• Hot-Swappable Power Supply choices include AC/DC power (90-250V), -48VDC, 24VDC power, or AC
• For future upgrades or while unit is in service, 10K-PSBLNK blank cover can be selected to cover one hot-swappable slot
• Non-blocking wire speed performance on all ports, 802.1p QoS prioritization
• ComprehensiveMagnum MNS-6K softwareincludes: RMON, SNMP, Telnet, IGMP, VLANs (Port-based and Tag-based), GVRP, Port-mirroring, CLI, Secure Web Management, Password Security, Port Security, SNTP, Event Log, BootP, DHCP
• IGMP Snoopingwith Multicast Message Filtering or Pruning

Literature

Product Selection Guides

• GarrettCom Product Selection Guide

Product Bulletins

• GarrettCom Magnum 10KT Configurable Managed Switch with Timing
• GarrettCom Magnum 10KG Configurable Managed Switch with Timing

News Releases

• GarrettCom Introduces Next-Generation Managed Switch Family Optimized for Smart Grid Initiatives in Power Utility Substations
• GarrettCom Managed Switch Family from Belden Adds Gigabit Ports to Support Smart Grid Applications

Software Downloads

• Magnum MNS-6K Management Software for Magnum 10K Managed Switches

Instillation and User Guides

• Magnum 10KT Managed Switch with Timing
• Magnum 10KG Managed Switch with Timing

Specifications

Mechanical

• Enclosure: Rugged high-strength sheet metal. 1.5U rack-mounting or stand-alone
• Rack-mounting: Brackets 19" included
• Cooling Method: Free convection, special (patent pending) thermal techniques
• Dimensions: 2.63in H (with thermal fins) x17.5in W x 12.in D (4.3cm H x 44.5cm W x 30.7cm D)
• Weight: 14.2 lbs. (6.5 kg)

Network Standards

• Ethernet: IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX
• Auto-negotiation and Auto-crossover: TP, IEEE 802.3u
• IEEE 1588v2: Compliant
• IPv6: Compliant

Performance

• Fiber Ports, 100 mB (multi-mode and single-mode): Configurable in modules. Regular ST or SC at 2/module, or SFF (Small Form Factor) for high fiber port density, 4 per module. Each FDX or HDX, default is FDX mode
• Gigabit Ports, 1000 Mb: Configurable, std. See configuration guide for selection of modules
• RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port, individually determined.10/100 auto-negotiating & auto-cross, 16 ports max or 32 ports max depending on model.
• All Ports Non-Blocking: Processing type: Store and Forward with IEEE 802.3x full-duplex flow control
• System aggregate forward and filter rate: 11.9Mpps.
• Address table: 8K nodes, self-learning, with address aging
• Packet buffers: 512KB for 10 and 100Mb, 128KB for Gb
• Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G)

AC (IEC-type, Male Recessed)

Power Input, AC: 100 to 240 VAC, 47 to 63 Hz (auto ranging)

Power Consumption: 30 watts typical when fully loaded

DC Dual Power Source (optional): When non-hot-swappable power supplies are ordered, the Magnum 10KG may be ordered with optional dual DC power input, for continuity of operation when either one of the DC input sources is interrupted. Available for 24/48VDC.

Hot-Swappable Power Supply Options (Up to two of the following may be chosen)

• High (H) Nominal: Input 90 to 250V AC/DC
• Low (L) Nominal: Input 22VDC to 60VDC

LED Indicators, 100 Mb and 10 Mb Fiber Ports

L/H: Steady on when fiber link is operational and blinking for data traffic

F/H: ON = full-duplex mode, OFF = half-duplex mode

LED Indicators, per RJ-45 Port

L/A: Steady on when fiber link is operational and blinking for data traffic

F/H: ON = full-duplex mode, OFF = half-duplex mode

Relay Contacts for Alarms (except PoE version)

Two Alarm Contact: HW & SW alarms are normally open until the unit is powered and software started. Under normal operation they are closed.

Form C hardware alarm will be opened with 1) any power supply loss and 2) fan failures. Form C software alarm will be opened when any pre-defined software event occurs. For PoE versions: One software controllable Form C alarm with NC/NO.

Operating Environment

• Operating Temperature: IEC 60068 Operating temp. per "Type Test" -40° to 185°F (-40° to 85°C)
• Temperature Rating (components): UL 60950 140°F (60°C)
• Storage Temperature: -40° to 185°F (-40°to 85°C)
• Ambient Relative Humidity: 5% to 95% (non-condensing)
• Altitude: -200 to 13000ft (-60 to 4000m)
• Conformal Coating (humidity protection): Request quote

Network Cable Connectors

• 1000 Mb Ports: Standard SFPs and GBICs supported, see modules description
• 100 Mb Fiber Ports: Multi-mode FX-MTRJ, LC, ST, SC; sgl-mode 20km LC, SC and ST, and 50km "long reach" sgl-mode LC, SC
• 10 Mb Fiber Ports: Multi-mode and single-mode ST
• 100 Mb Copper Ports: Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP

Agency Standards Approval and Compliance

• UL/cUL 60950, EN55022 FCC Part 15: CE, EMC & ENV
• IEC61850-3: EMC and Environmental Operating Conditions Class C for Power Substations
• IEEE 1613 Class 2: Environmental Standard for Electric Power Substations
• NEMA TS-2: Traffic Control
• EN50155: Railways

Warranty

Warranty Five Years

Product Bulletins with Data Sheets and Product Certifications

• GarrettCom Magnum 10KT Configurable Managed Switch with Timing
• GarrettCom Magnum 10KG Configurable Managed Switch with Timing