APCUC Series - Unshielded Multi-Core Control Cable

CONSTRUCTION:
Flexible bare copper conductors, PVC insulation, cabled, tape wrapped,
overall PVC jacket.

19APCUC Series - Unshielded Multi-Core Control Cable with SWA

CONSTRUCTION:
Flexible bare copper conductors, PVC insulation, cabled, tape wrapped,
PVC inner jacket, steel wire armouring, PVC outer jacket.

GENERAL APPLICATION
• Control Cables: low voltage AC and DC power supply and control.
　

FEATURES
• Based on relevant international IEC and broadly respected standards.
• Overall shield configurations are with shorting folded foils in order to maintain metal-to-metal contact for improved high frequency shielding performance.
• For occasional flexing (free movement without load) and fixed installation.
• Small cable diameters.
• Optional: Armouring for extra cable protection.

INSTALLATION GUIDELINES AND RECOMMENDATIONS
• On racks, trays and/or conduits.
• In dry, damp and/or wet locations.
Note 1: This series of cables are not longitudinally watertight.
Note 2: In case of continued presence of water, cables with a polyethylene (PE) jacket are recommended.
• Without armouring not recommended for direct burial.
• Minimum bending radius fixed cables: 6 x Overall Diameter.
• Minimum bending radius occasional flexing cables: 15 x Overall Diameter.
• Maximum pulling force: 70 N per square millimeter copper conductor.
　

STANDARD REFERENCE
• BS 5308 and PAS 5308
• IEC 60227, GB 5023
• IEC 60228 - class 1, 2 and 5, GB/T 3956, IS 8130
• VDE 0250-204
• IS 694
• IEC 60332-1, GB/T 18380.1
• RoHS directives