商品編號: Thermax-Aircraft-Ent
Thermax, Aircraft Ent. Cable, Aircraft Entertainment System Cables 航空器娛樂系統電纜線(可接受需求定製)
Aircraft Entertainment System Cables
As commercial aircraft entertainment systems become increasingly sophisticated, the technology of the cables used in the systems is an important factor in clean signal delivery. Thermax aircraft entertainment system cables are custom designs that are composed of materials that best suit not only the electrical and electronic characteristics of the specific system, but meet safety and reliability requirements as well. These cables typically include coaxial and/or high-speed twisted-pair twinaxial data cables, along with other component wires for power and signal transmission. The data-transmission cable components can also be supplied with our unique LTE expanded PTFE dielectric for increased data speed and light weight. Please contact yourThermax representative with your specific requirements.
Specification
Component wire insulation
|
 |
Extruded FEP. PTFE. composite types, and ETFE available depending on application.
|
 |
Component wire conductor
|
 |
Tin-plated stranded copper. Also available in high-strength copper alloy. Nickel or silver plating available for higher temperature rating than tin plating.
|
 |
Twisted-pair data cables: Conductors
|
 |
24 AWG (19/36), silver-plated high-strength copper alloy conductors.
|
 |
Twisted-pair data cables: Primary Insulation
|
 |
LTE expanded extruded low-density PTFE, or other insulation types.
|
 |
Twisted-pair data cables: Shield
|
 |
38 AWG nickel-plated copper.
|
 |
Twisted-pair data cables: Jacket
|
 |
Extruded FEP. PTFE, composite types, and ETFE available depending on application.
|
 |
Coaxial cables
|
 |
Light weight, low-loss types with LTE expanded extruded PTFE dielectric for velocity of propagation up to 80%; 50 or 75 ohm impedance. Silver-plated copper shield, with extruded FEP jackets; other jacket materials available.
|
 |
Cabling
|
 |
Component wires and cables are cabled together and jacketed with FEP, ETFE, or high-density polyurethane.
|
 |
Identification
|
 |
As required including permanent laser marking. |
|
|