SHIPFLEX^® 109

• Special drag chain cable
• UL-Style 20234
• Temperature range
  flexing -40°C to +80°C
  fixed installation -40°C to +80°C
• Installation temperature
  min. -25°C
• Nominal voltage
  to VDE U₀/U 0,6/1 kV
  UL 1000 V
• Insulation resistance
  min. 100 MOhm x km
• Minimum bending radius
  7,5x cable Ø
• Coupling resistance
  (for -C-type)
  max. 250 Ohm/km
• Radiation resistance
  up to 100x10⁶ cJ/kg (up to 100 Mrad)

• Bare copper-conductor, to
  DIN VDE 0295 cl.6, extra fine-wire,
  BS 6360 cl.6, IEC 60228 cl.6
• Special core insulation
• Colour black or green-yellow
• Screened type with braided screen of
  tinned copper wires, coverage approx. 85 %
• Full polyurethane outer sheath to
  UL std. 1581 Tab. 50227
• Sheath colour orange (RAL 2003)
• with meter marking

• Flame retardant to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2/ IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)
• Halogen-free to DIN VDE 0482 part 267/
  DIN EN 50267-2-1/IEC 60754-1 (equivalent
  DIN VDE 0472 part 815)
• Oil resistant to IEC 60092-350, appendix F
• Behaviour at low temperature at -40°C to
  IEC 60092-350, appendix E
• Weather, ozon and UV-resistant
• The materials used in manufacture are
  cadmium-free and contain no silicone
  and free from substances harmful to
  the wetting properties of lacquers

• AWG sizes are approximate equivalent
  values. The actual cross-section is in mm².
  

HELUKABEL^® SHIPFLEX^® 109 Single is a new developed and successfully tested special drag chain cable which meets the requirements of the strict standards for application in offshore-areas. For this two - line standard there is a Lloyds Register approval . The outer sheath insulation of non-adhesive Polyurethan allows the application in extremely oily and rough environmental conditions. For applications which go beyond standard solutions we recommend that you fill out our especially developed questionnaire for drag chains.