• Special PVC single core with increased
  heat-resistance up to 90°C acc. to
  DIN VDE 0285-525-2-31/
  DIN EN 50525-2-31
• Temperature range
  flexing +5°C to +90°C
• max. Temperature at conductor
  under permanent load: +90°C
  
• Nominal voltage U₀/U 450/750 V
• Test voltage 2000 V
• Insulation resistance
  min. 20 MOhm x km
• Minimum bending radius
  10-15x core Ø
• Radiation resistance
  up to 80x10⁶ cJ/kg (up to 80 Mrad)

• Bare copper-conductor, to
  DIN VDE 0295 cl.5, fine-wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of heat-resistant PVC
  compound type TI3 to
  DIN VDE 0207-363-3/DIN EN 50363-3
• Core identification see table below

• Heat-resistant special PVC
  compound of selected stabilizer
  and plasticizer
• Not to be used in contact with objects
  higher than 85°C
• The materials used in manufacture are
  cadmium-free and contain no silicone
  and free from substances harmful to
  the wetting properties of lacquers

Tests

• PVC self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2/IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)