High-temperature Cable
200°C (392°F)

SRGK

Silicone rubber insulation
Glass braid/braided K-fiber jacket
600 V
　

SPECIFICATIONS
1. CONDUCTOR: Tinned, annealed copper per ASTM B-33, Class B stranded per ASTM B-8
2. INSULATION: Silicone rubber
3. INSULATION COVERING: Braided-glass yarn with high-temperature finish
4. COLOR CODE: Per ICEA Method 5, Table E-2 or Table E-1*
5. ASSEMBLY:Conductors are cabled with flame-retardant fillers as necessary to make round, a binder tape is applied over the assembly
6. OVERALL JACKET: K-fiber braid with abrasion-resistant finish
7. STANDARDS: Meets the requirements of ICEA S-19-81 (NEMA WC3) Rubber Insulated Wire and Cable and also meets the IEEE 383 Flame Test
8. AMPACITY: Based on three single 200°C rated insulated conductors in raceway or cable with an ambient temperature of 40°C per NEC 310.18, values are derated for
additional conductors per 2008 NEC Table 310.15(B)(2)(a).
9. TEMPERATURE:200°C
10.VOLTAGE: 600 V
　

APPLICATIONS
Suitable for installation above grade in conduit or in applications where high-temperature resistance to flame with circuit integrity is required. These cables are especially
suited for utility applications in conventional generating stations or industrial applications.

High-temperature Cable
200°C (392°F)

Sil-A-Blend

RADIX WIRE CO
Silicone rubber with intermediate fiberglass layer
600 V
UL 3512, 3604
　

SPECIFICATIONS
1. CONDUCTOR: Tinned, annealed copper per ASTM B-33
2. INSULATION: Silicone rubber with an intermediate fiberglass layer
3. STANDARDS: Meets UL requirements for Style 3512 and 3604, also meets the CSA requirements for AWM at 200°C
4. TEMPERATURE: 200°C
5. VOLTAGE:600 V
　

APPLICATIONS
For use in small and large appliances, food-service equipment, lighting fixtures, igniters, motors, generators and transformers.