1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)

    ANIXT-SHD-GC-2kV EPR/Thermoset Jacket 90°C,2KV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)
    看原圖
    		5270835




    商品編號: ANIXT-SHD-GC-2kV

    ANIXT-SHD-GC-2kV EPR/Thermoset Jacket 90°C,2KV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)

    For use with longwall miners, continuous miners,conveyors, pumps, drills, cutters and loaders.Suitable for high voltage distribution in mines whereportable power is required.



    ★★★★商品說明★★★★

    SHD-GC
    2kV
    EPR Insulation
    Thermoset Jacket
    90°C
    　

    APPLICATIONS:
    For use with longwall miners, continuous miners,
    conveyors, pumps, drills, cutters and loaders.
    Suitable for high voltage distribution in mines where
    portable power is required.
    　

    SPECIFICATIONS:
    1. CONDUCTOR:     Rope-stranded, annealed, tinned copper.
    2. INSULATION: Ethylene propylene rubber (EPR) per ICEA S-75-381 (NEMA WC58).
    3. SHIELD: Braided, tinned copper shield, or combination braid shield of tinned copper
    and nylon.
    4. GROUND CONDUCTOR: Flexible stranded, coated, annealed copper.
    5. GROUND CHECK CONDUCTOR: Insulated extra flexible stranded, annealed copper.
    6. ASSEMBLY: Three conductors, two ground conductors and one ground check
    conductor, cabled with fillers as necessary to make round.
    7. OVERALL JACKET: Thermoset compound.
    8. STANDARDS: Meets the requirements of ICEA S-75-381. Accepted by MSHA,
    and marked with the manufacturer’s P number.
    9. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
    10. TEMPERATURE: 90°C
    11. VOLTAGE: 2kV