MPF-GC
5kV
Mine Power Feeder
EPR Insulation
Thermoset Jacket
90°C Shielded
　

APPLICATIONS:
Suitable for installation in boreholes, shafts,
horizontal runs in underground tunnels, aerial
suspension on insulators and other semi-permanent
mining and industrial feeder installations.
　

SPECIFICATIONS:
1. CONDUCTOR: Class B stranded bare copper. An extruded semi-conducting compound
is applied over the conductor.
2. INSULATION: Ethylene propylene rubber (EPR) per ICEA S-75-381 (NEMA WC58).
3. SHIELD: An extruded semi-conducting compound is applied over the insulation. A flat
copper tape is helically applied.
4. COLOR CODE: Either printing or marker tapes applied under the copper tape.
(Black, white and red.)
5. ASSEMBLY: Insulated conductors, two tinned Class B stranded uninsulated ground
wires, yellow insulated ground check wire and fillers are assembled with an overall
polyester tape.
6. OVERALL JACKET: Thermoset compound per ICEA S-75-381.
7. STANDARDS: Meets the requirements of ICEA S-75-381. Accepted by MSHA, and
marked with the manufacturer’s P number.
8. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
9. TEMPERATURE: 90°C
10. VOLTAGE: 5kV, 8kV and 15kV