Power Cable
600 V Multiconductor

XLP/TS-CPE

XLP insulation
TS-CPE jacket
UL Listed Type TC
90°C, 600 V
　

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, tinned copper per ASTM B-3 and B-8
2. INSULATION: Cross-Linked Polyethylene (XLP), per ICEA S-95-658 (NEMA WC70), meets UL requirements for Type XHHW-2
3. COLOR CODE: Conductors are coded per ICEA Method 4 (printed numbers)
4. ASSEMBLY: Insulated conductors together with one bare UL ground wire, cabled together with suitable fillers and wrapped with a clear aluminum/polyester tape
5. OVERALL JACKET: Sunlight-resistant thermoset Chlorinated Polyethylene (TS-CPE)
6. STANDARDS: Meets UL 1277 requirements for Type TC cables having VW-1 rated XHHW-2 conductors. Cables are listed for direct burial and meet the IEEE 1202, IEEE 383, and
UL 1685, 70,000 Btu/hr flame tests as well as the ICEA T-29-520, 210,000 Btu/hr flame test
7. AMPACITY: Based on not more than three conductors in raceway or cable or earth per NEC Table 310.16 with an ambient temperature of 30°C and a conductor temperature of
90°C. All 4-conductor values have been derated per 2008 NEC Table 310.15(B)(2)(a)
8. TEMPERATURE:90°C
9. VOLTAGE: 600 V

APPLICATIONS
Used for control and power applications in chemical plants, steel mills, industrial plants, utility substations and generating stations, residential and commercial buildings.
May be used in Class 1, Div. 2 Hazardous Locations per NEC Art. 501. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable."
Suitable for aerial, duct or direct burial.