Designed for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. May be used in Class I, Div. 2 and Class II Div 2
Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable: Type TC."

Industrial Tray Cable

XLP/TS-CPE

XLP insulation
TS-CPE jacket
90°C, 600 V

SPECIFICATIONS
1. CONDUCTORS:Class B stranded tinned copper per ASTM B-3, B-8 and B-33
2. INSULATION: Cross-Linked Polyethylene (XLPE) per ICEA S-73-532 (NEMA WC57), meets UL 44 requirements for VW-1, Type XHHW-2 conductors
3. COLOR CODE: Conductors shall be color coded per ICEA Method 1, Table E-2 (formerly K-2)
4. ASSEMBLY:Conductors are cabled with fillers where necessary to make round, two conductor cables are flat
5. OVERALL JACKET:Sunlight-resistant Thermoset Chlorinated Polyethylene (TS-CPE) per UL 1277
6. STANDARDS: Meets per UL 1277 requirements for Type TC cables having VW-1, XHHW-2 conductors, cables are listed for direct burial and meet the IEEE 1202, IEEE 383,
and UL 1685. 70,000 Btu/hr flame tests as well as the ICEA T-29-520, 210,000 Btu/hr flame tests
7. AMPACITY:Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30ºC and a conductor temperature of 90ºC per NEC 310.16,
the values have been derated where applicable
8. TEMPERATURE:90ºC
9. VOLTAGE: 600 V

APPLICATIONS
Designed for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. May be used in Class I, Div. 2 and Class II Div 2
Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable: Type TC."