產品搜尋

分　類：
關鍵字：

首頁 > Power/Data-Cable(進口電線電纜)> Fireproof-Fire Resistant LSOH Sheathed Cables(FIREFLEX) 耐火級低煙無毒電纜線 > Caledonian-Fire Resistant Instrumentation Cables (950°C 180 minutes) 耐火級低煙無毒儀表控制電纜線

CALEDONIAN-LI-05SOZ1 Fire Resistant 300/500V Braid-Screened Flexible Equipment Cables (Multipair) 多對型耐火級矽橡膠 + 鋁箔 + 銅網隔離 + 低煙無毒儀表控制電纜

5543571

商品編號: CALEDONIAN-LI-05SOZ1

CALEDONIAN-LI-05SOZ1 Fire Resistant 300/500V Braid-Screened Flexible Equipment Cables (Multipair) 多對型耐火級矽橡膠 + 鋁箔 + 銅網隔離 + 低煙無毒儀表控制電纜

APPLICATION
The cables are designed for indoor instrumentation and control cabling, electrically noisy
environments and fire alarm systems in office buildings.
STANDARDS
Basic design to VDE 0812/EN 50290-2-27

★★★★商品說明★★★★

PRODUCTS

Fire Resistant Instrumention Cables
Braid-Screened Flexible Equipment Cables
LI-05SOZ1 FE180 (PH30) (CU/SR/OSCR/LSZH 300/500V Class 5)
APPLICATION
The cables are designed for indoor instrumentation and control cabling, electrically noisy environments and fire alarm systems in office buildings.
STANDARDS
Basic design to VDE 0812/EN 50290-2-27
FIRE PERFORMANCE

Circuit Integrity	IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)
Circuit Integrity with mechanical shock	EN 50200(PH30); CEI 20-36/4-0
Circuit Integrity with mechanical shock & water spray	EN 50200 annex E
System circuit integrity	DIN 4102-12, E30 depending on lay system
Flame Retardance (Single Vertical Wire Test)	EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1; DIN VDE 0482-265-2-1
Reduced Fire Propagation (Vertically-mounted bundled wires & cable test)	EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free	IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission	IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission	IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2; BS 7622-1&2
No Toxic gases	NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.
CABLE CONSTRUCTION
Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2.
Insulation: Fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.
Cabling: The insulated cores are cabled in concentric layers with suitable non-hygroscopic fillers.
Fire Barrier: Polyester tape + fiber glass tape
Overall screen: Aluminum/polyester tape with tinned copper braid (min. 85% Coverage)
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.) .
VOLTAGE RATING
300/500 V
COLOUR CODE
Insulation Colour: Per VDE 0812
Sheath Colour: Orange (other colours on request)
TYPE CODE
LI Equipment cable with fine stranded conductor
H Halogen free ceramic polymer compound C Copper Wire Braid
FE180 Insulation integrity (950°C 180 minutes)
PH 90 Fire Test for 90 mins at 830 C
Physical AND THERMAL PROPERTIES
Temperature range during operation (fixed state): -30°C – +90°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 7.5 x Overall Diameter
Electrical PROPERTIES

Dielectric test:	2000 V r.m.s. x 5’ (core/core)
Insulation Resistance	≥300 MΩ x km (at 20°C);
Short circuit Temperature	350°C

Braid-Screened Flexible Equipment Cables