1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜

    ANIXT-IMSA 20-1-Solid TRAFFIC SIGNAL 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt
    看原圖
    		5270790




    商品編號: ANIXT-IMSA-20-1

    ANIXT-IMSA 20-1-Solid TRAFFIC SIGNAL 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt

    For use in signal systems, and approved for installationin underground ducts or as aerial cable supportedby a messenger.



    ★★★★商品說明★★★★

    IMSA 20-1
    SOLID CONDUCTOR
    Polyethylene Insulation
    Polyethylene Jacket
    75°C, 600 Volt
    　

    APPLICATION:
    For use in signal systems, and approved for installation
    in underground ducts or as aerial cable supported
    by a messenger.
    　

    SPECIFICATIONS:
    1. CONDUCTORS:     Bare solid annealed copper, conforming to the requirements of ASTM B-3,
    latest edition.
    2. INSULATION: The insulation compound before application to the conductors is heatstabilized
    polyethylene, conforming to the melt-index requirements of ASTM D-1248, 65T,
    Class B, Grade 4. After application to the conductors, the insulation meets all
    requirements of the latest IMSA Specification No. 20-1 when tested in accordance with
    ASTM D-1351, latest edition, and D-470, latest edition.
    3. ASSEMBLY: The insulated conductors are laid up in compact cable form, and bound with
    a spiral wrap of moisture-resistant tape applied to lap at least 10 percent of its width.
    4. OVERALL JACKET: High molecular weight polyethylene, meeting the requirements of
    ASTM D-1248, 65T, for Dielectric Material, Class C, Grade 5, J3.
    5. STANDARDS: The completed cable meets or exceeds the latest International Municipal
    Signal Association (IMSA) Specification No. 20-1.
    6. TEMPERATURE: 75°C
    7. VOLTAGE: 600 Volts