宜大電線有限公司

產品搜尋

分　類：
關鍵字：

首頁 > Power/Data-Cable(進口電線電纜)> A-Power and Control Cable 電力及控制電纜 > An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1

2A-1603 Awg16-3C VNTC STR BC PVC NYL PVC JKT 600V TC-ER E2 PVC尼龍被覆控制電纜

5146263

商品編號: A-2A-1603

2A-1603 Awg16-3C VNTC STR BC PVC NYL PVC JKT 600V TC-ER E2 PVC尼龍被覆控制電纜

PVC-nylon insulation
PVC jacket
90°C, 600 V

Tech. Info & Standards:

SPECIFICATIONS:
1. CONDUCTORS: Class B stranded bare copper per UL 83 and 62.
2. INSULATION: Polyvinyl chloride (PVC) per UL 62 for Type TFFN (18-16 AWG) or UL 83 for Type THWN or THHN wire. Average thickness is 15 mils for sizes 18-12 AWG and 20 mils for 10 AWG.
3. INSULATION JACKET: Each insulated conductor is jacketed with nylon meeting UL 62 for Type TFFN or UL 83 for Type THWN or THHN wire. Minimum thickness is 4 mils.
4. COLOR CODE: ICEA Method 1, Table E-2 (formerly K-2).
5. ASSEMBLY: Conductors are cabled with fillers where necessary to make round. Two conductor cables are flat.
6. OVERALL JACKET: Sunlight resistant polyvinyl chloride (PVC) per UL 1277.
7. STANDARDS: Tested per UL requirements for Type TC cables having THWN or THHN (TFFN) conductors. Cables are listed for direct burial and meet the IEEE 1202, UL 1277 and ICEA 70,000 BTU Flame Tests.
8. AMPACITY: Based on not more than three conductors in receway or cable or earth with an ambient temperature of 30¦C per NEC 310-16. The values have been derated where applicable.
9. TEMPERATURE: 90¦C
10 VOLTAGE: 600V

Applications:

Designed for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. May be used in Class 1, Div. 2 Hazardous Locations per NEC Art. 501. These cables also conform to Art. 318 "Cable Trays" and Art 340 "Power and Control Tray Cable."

Specifications:

CONDUCTORS: Class B stranded bare copper per UL 83 and 62
INSULATION: Polyvinyl Chloride (PVC) per UL 62 for Type TFFN (18-16 AWG) or UL 83 for Type THWN or THHN wire, nominal thickness is 15 mils for sizes 18-12 AWG and 20 mils for 10 AWG
INSULATION JACKET: Each insulated conductor is jacketed with nylon meeting UL 62 for Type TFFN or UL 83 for Type THWN or THHN wire, minimum thickness is 4 mils
COLOR CODE: ICEA Method 1, Table E-2 (formerly K-2)
ASSEMBLY: Conductors are cabled with fillers where necessary to make round, two conductor cables are flat
OVERALL JACKET: Sunlight-resistant Polyvinyl Chloride (PVC) per UL 1277
STANDARDS: Meets UL requirements for Type TC cables having THWN or THHN (TFFN) conductors, cables are listed for direct burial and meet the IEEE 1202, UL 1277 and ICEA 70,000 BTU Flame Tests
AMPACITY: Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30ºC per NEC Table 310.16, the values have been derated where applicable
TEMPERATURE: 90ºC
VOLTAGE: 600 V

★★★★商品規格描述★★★★

Attributes
Description	16-3C VNTC STR BC PVC NYL PVC JKT 600V TC-ER E2
	STRANDED BARE COPPER CONDUCTORS, PVC-NYLON INSULATION, SUN-RESISTANT PVC JACKET, TESTED PER UL REQUIREMENTS FOR TYPE TC CABLES HAVING THWN OR THHN (TFFN) CONDUCTORS. CABLES ARE LISTED FOR DIRECT BURIAL. 90C, 600V

Conductor Size/Gauge:	16 AWG
CONDUCTOR: Count	3 CONDUCTOR
Type	STRANDED
Material	BARE COPPER
Voltage Range:	600
Temperature Rating:	90 DEGREES CENTIGRADE
INSULATION: Material	PVC/NYL-PVC/NYLON
Color Code	ICEA METHOD 1 - TABLE K2
Screen/Shield:	UNSHIELDED
JACKETING: Material	PVC-POLYVINYL CHLORIDE
Armor:	NO
EARTH/GROUND WIRES:	NO
Composite:	NO
Product Type:	VNTC CONTROL
Amps per Conductor	18
Approx. Wt. lb/1000 ft	66
Conductor Size AWG	16
No. of Conductors	3
Nominal O.D. (in.)	0.312
Overall Jacket Thickness (in.)	0.045
Unspsc Code	26121603