1. TACHII-Coaxial Cable 廣播系統用同軸電纜線
    TACHII-Connector / Crimping Tools / Mounting 同軸電纜接頭 工具
    TACHII-Digital Audio Cable廣播系統用優質聲音傳輸線
    TACHII-Power Cable for Broadcasting 廣播系統用電源線
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > TACHII-Connector / Crimping Tools / Mounting 同軸電纜接頭 工具

    TACHII-ＮＥＷ５０Ω Ｎ type Connector（for Digital Microwave Link）同軸電纜 N 接頭 工具
    看原圖
    		5492910




    商品編號: TACHII-N-P1702

    TACHII-ＮＥＷ５０Ω Ｎ type Connector（for Digital Microwave Link）同軸電纜 N 接頭 工具

    Main specifications

    Characteristic impedance ：５０Ω
    Cable mounting               ：Triple chuck system

    ＜Materials・Plating＞

    Body・Nut                  ：Brass＋Nickel plating
    （Gasket side）          ：Silicon rubber (Plug）
    （Outer contact side）：Phosphor bronze＋Nickel plating（Plug）
    Clamp A                      ：Brass＋Nickel plating
    Clamp B

    （Metalic part）            ：Brass＋Nickel plating
    （Insulator part）          ：Teflon resin
    （Center contact part） ：Brass＋Gold plating（N-P1702）
                                           ：Berylium Copper＋Gold plating（N-J1703、N-PJ1704）
                                           ：Brass＋Silver plating（N-P1739）
                                           ：Berylium Copper＋Silver plating（N-PJ1791）
    Mounting cord for
    Protection cap                ：Cloth cord with Nylon




    ★★★★商品說明★★★★

    Applications

    Specialized impedance 50Ω N type connedtor, for TCX-5DFW/TCX-5DFWS for Digital Microwave Link mobile use and for TCX-8DHFBW(PE) for
    Digital Microwave Link anchoring wire use. (Be careful that mounting to other companies’ cable is not subject to our guarantee.)
    　

    Features
    ●In mounting to general N type connectors, as connection at shield side of Coaxial Cable, braid is tucked into clamp and bushing. At this time,
    connector may be coming out, if pulled to cable side by a little strong force as the stuffing structure is made to tuck and hold gasket (silicon
    rubber) down. To settle these, TACHII asked to NOBLE MUSEN Co. to develop original structure connector with triple chuck system. The stabilized
    mounting strength has been assured with the developed structure to tuck braid with two A & B clamp without using gasket, and to make clamp A
    (near to cable side) chew the cable trunking by nut stuffing.
    ●As VＳＷＲ property is ensured at 1.2 max. (30kHz ～ 2000MHz), this connector can be compliant with allowance for IF signal (130 MHz) on actual
    Digital Microwave Link transmission.
    ●The mounting to center connector shall be with solder. In processing to ＴＣＸ-５ＤＦＷＳ, solder preliminary to conductor. Refer to Page 26 on the
    details of mounting to ＴＣＸ-５ＤＦＷ, ＴＣＸ-５ＤＦＷＳ.
    ●To prevent damege to connector on handling, TACHII can offer Connector protection cap for 5D size.
    ●Jack type for panel mounting is available on request. As the cable is hard and heavy for specialized N-PJ1791 for ＴＣＸ-８ＤＨＦＢＷ(PE), make sure to
    keep sufficient mounting strength on panel side designing. Contact with our business department on the details of Ｎ-ＰJ１７９１.
    ●All these connectors made by NOBLE MUSEN Co. have been exclusively designed for TACHII’ s cables. Contact with our business department
    directly on the specifications, prices, and delivery times, as NOBLE MUSEN Co. does not accept any inquiry.
    ●The products are also available as the harness finsihed cable with connector. Contact with our business department on details.
    Characteristic impedance