1. MicroCoax- Semi-Rigid Coaxial Cable 50 ohms Insertion Loss Less 20 GHz 半硬質特殊同軸電纜
    MicroCoax-Flexible Coaxial 超柔軟特殊同軸電纜
    MicroCoax-Handformable Coaxial Cable(Alumiline Cable ) 特殊同軸電纜
    MicroCoax-Handformable Coaxial Cable(UTiFORM Tinned Braid Cable ) 特殊同軸電纜
    MicroCoax-Semi-Rigid Coaxial all cables 50 ohms all cables less than 0.085 inches 半硬質特殊同軸電纜
    MicroCoax-Semi-Rigid Coaxial all cables 50 ohms all cables 0.085 to 0.141 inches 半硬質特殊同軸電纜
    MIL-Low Loss Microwave Coaxial Cables 低損耗微波同軸電纜
    MIL-Low Loss RF & Microwave Coaxial Cables Connector 接頭
    MIL-RF Parts
    MIL-Semi-Flexible Coaxial Cable 半柔性手工成形同軸電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > MicroCoax-Semi-Rigid Coaxial all cables 50 ohms all cables less than 0.085 inches 半硬質特殊同軸電纜

    MicroCoax-UT-034-25-TP Semi-Rigid Coaxial Impedance, 25+/-2.0 Ohms SPCW, PTFE, (Tin Plated Copper- Outer Conductor) 鍍銀銅包鋼芯線, 鍍錫銅管外被半硬質特殊同軸電纜
    看原圖
    		代碼 5408438




    商品編號: Micro-UT-034-25-TP

    MicroCoax-UT-034-25-TP Semi-Rigid Coaxial Impedance, 25+/-2.0 Ohms SPCW, PTFE, (Tin Plated Copper- Outer Conductor) 鍍銀銅包鋼芯線, 鍍錫銅管外被半硬質特殊同軸電纜

    Semi-Rigid Coaxial Cable
    　
    Micro-Coax semi-rigid cable is still the best pure microwave transmission medium available in the world. The solid tubular outer conductor yields 100% RF shielding and enables the dielectric and center conductor to remain precisely spaced. This results in optimum impedance control as well as the lowest possible insertion loss and weight to size ratios. Semi-rigid cables are also inexpensive to purchase when compared to many other coaxial cable alternatives. The primary considerations for using semi-rigid are the availability of bend tooling, the difficulty in routing and the need to reform the cable. Generally, the more flexibility required, the more the designer should consider other alternatives. However, for pure microwave performance semi-rigid can't be beat.

    Please select from the choices below:

    * Low Loss cables employ a low density PTFE dielectric for improved insertion loss, electrical phase stability and increased temperature range.
    ** MIL-C-17 cables are on the MIL-C-17 qualified products list (QPL) having passed all of the qualifications and acceptance requirements of MIL-C-17.
    *** Aluminum jacked cables, which are typically tin-plated for solderability enable repeated bending and hand forming. They are excellent choices when the performance of semi-rigid is required, together with flexibility to hand-form in place.

    　



    ★★★★商品說明★★★★


    206 Jones Blvd. Pottstown, PA 19464 USA
    Phone: 610-495-0110 : 800-223-2629
    www.micro-coax.com
    　

    UT-034-25-TP

    Semi-Rigid Coaxial Cable
    MECHANICAL CHARACTERISTICS
    Outer Conductor Diameter, inch (mm) 0.034+0.002 / -0.001 (0.864+0.0508 / -0.0254)
    Dielectric Diameter, inch (mm) 0.023 (0.584)
    Center Conductor Diameter, inch (mm) 0.0126+/-0.0005 (0.320+/-1.0127)
    Maximum Length, feet (meters) 15 (4.57)
    Minimum Inside Bend Radius, inch (mm) 0.05 (1.27)
    Weight, pounds/100 ft. (kg/100 meters) 0.26 (0.39)
    ELECTRICAL CHARACTERISTICS
    Impedance, ohms 25+/-2.0
    Frequency Range GHz DC-148
    Velocity of Propagation % 70
    Capacitance, pF/ft. (pF/meter) 58 (190.4)
    Typical Insertion Loss, dB/ft. (dB/meter)
    and Average Power Handling, Watts CW at 20
    degrees Celsius and Sea level    		 Frequency Insertion Loss Power
    0.5 GHz
    1.0 GHz
    5.0 GHz
    10.0 GHz
    20.0 GHz    		 0.50 (1.64)
    0.71 (2.32)
    1.61 (5.27)
    2.30 (7.53)
    3.29 (10.81)    		 25.4
    17.9
    7.9
    5.6
    3.9
    Corona Extinction Voltage, VRMS @ 60 Hz 200
    Voltage Withstand, VRMS @ 60 Hz 500
    ENVIRONMENTAL CHARACTERISTICS
    Outer Conductor Integrity Temperature, Deg Celsius 175
    Maximum Operating Temperature, Deg Celsius 150
    MATERIALS
    Outer Conductor Tin plated Copper
    Dielectric PTFE
    Center Conductor SPCW
    CUTAWAY


    ★★★★使用操作說明★★★★

    Cable P/N
    		 Diameter
    (inches)    		 Insertion Loss
    (dB/ft@10GHz)    		 Impedance
    (ohms)    		 Max Frequency
    (GHz)
    UT-034-25 0.034 2.3 25 148
    UT-034-25-SP 0.034 2.3 25 148
    UT-034-25-TP 0.034 2.3 25 148
    UT-034C-10 0.034 4.54 10 116
    UT-034C-17 0.034 2.38 17 128
    UT-038C-25/DA25038 0.038 1.93 25 120
    UT-038C-25-TP/DE25038 0.038 1.93 25 120
    UT-043C-10 0.043 3 10 81
    UT-043C-10-SP 0.043 2.998 10 81
    UT-044-12/CA12044 0.044 3.1 12 100
    UT-044-12-TP/CE12044 0.044 3.05 12 100
    UT-044C-5 0.044 5.51 5 77
    UT-047-25/CA25047 0.047 1.93 25 120
    UT-047-25-TP 0.047 1.97 25 120
    UT-047C-35 0.047 1.24 35 100
    UT-062-18/CA18062 0.062 1.4 18 65
    UT-062-18-TP/CE18062 0.062 1.42 18 65
    UT-062C-18/DA18062 0.062 1.4 18 64
    UT-062C-18-TP/DE18062 0.062 1.4 18 64
    UT-070C-10 0.070 2.33 10 58
    UT-070C-10-TP/DE10070 0.070 0.72 10 58
    UT-070C-25 0.070 1.03 25 59
    UT-070C-25-TP 0.070 1.03 25 59
    UT-075C-10 0.075 1.95 10 51
    UT-075C-10-SP 0.075 1.95 10 51
    UT-075C-10-TP 0.075 1.95 10 51