1. MicroCoax- Semi-Rigid Coaxial Cable 50 ohms Insertion Loss Less 20 GHz 半硬質特殊同軸電纜
    MicroCoax-Flexible Coaxial 超柔軟特殊同軸電纜
    MicroCoax-Handformable Coaxial Cable(Alumiline Cable ) 特殊同軸電纜
    MicroCoax-Handformable Coaxial Cable(UTiFORM Tinned Braid Cable ) 特殊同軸電纜
    MicroCoax-Semi-Rigid Coaxial all cables 50 ohms all cables less than 0.085 inches 半硬質特殊同軸電纜
    MicroCoax-Semi-Rigid Coaxial all cables 50 ohms all cables 0.085 to 0.141 inches 半硬質特殊同軸電纜
    MIL-Low Loss Microwave Coaxial Cables 低損耗微波同軸電纜
    MIL-Low Loss RF & Microwave Coaxial Cables Connector 接頭
    MIL-RF Parts
    MIL-Semi-Flexible Coaxial Cable 半柔性手工成形同軸電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > MicroCoax-Handformable Coaxial Cable(Alumiline Cable ) 特殊同軸電纜

    MicroCoax-UT-047C-AL-TP-LL Handformable Coaxial Cable (Low Loss Phase Stable PTFE Dielectric Cables ) 特殊同軸電纜
    看原圖
    		代碼 5407311




    商品編號: Micro-UT-047C-AL-TP-LL

    MicroCoax-UT-047C-AL-TP-LL Handformable Coaxial Cable (Low Loss Phase Stable PTFE Dielectric Cables ) 特殊同軸電纜

    Handformable Coaxial Cable
    　
    Handformable cables occupy a position between semi-rigid and flexible cables. These cables are good choices when forming at the point of installation is required, but are not designed for repeated flexure. Micro-Coax allows you to select from both solid aluminum jacketed cables (Alumiline) or tinned-braided cables (UTiFORM). The aluminum jacket provides 100% shielding and optimized signal performance just like copper jacket semi-rigid while the tinned-braided UTiFORM offers an even more flexible alternative. Both products are built around the same line sizes as standard semi-rigid cables thus enabling use of all of the same connectors and tooling, but each has its own unique advantages.

    UTiFORM employs a lead-free alloy dipped outer conductor that is excellent for repeated forming. This dipped braid construction enables the user to minimize system installation costs, because cables can be easily configured as they are installed.

    Alumiline can also be formed repeatedly, but offers the added advantage of a solid aluminum outer conductor, which greatly increases the RF shielding performance and reduces the chances of passive inter modulation when compared to UTiFORM. Additionally, Alumiline cables have much lower insertion loss than UTiFORM cables.

    Both UTiFORM and Alumiline are available with either a solid or low-loss PTFE dielectric for improved phase stability. When making a choice between these two hand-formable products, consider frequency of operation and overall electrical performance favoring the Alumiline for higher frequency and more critical applications.

    　



    ★★★★商品說明★★★★

    　

    UT-047C-AL-TP-LL

    Handformable Aluminum
    Jacketed Cable
    MECHANICAL CHARACTERISTICS
    Outer Conductor Diameter, inch (mm) 0.047+ 0.002 / -0.001 (1.194+0.0508 / -0.0254)
    Dielectric Diameter, inch (mm) 0.037 (0.94)
    Center Conductor Diameter, inch (mm) 0.0126+/-0.0005 (0.320+/-0.0127)
    Maximum Length, feet (meters) 20 (6.1)
    Minimum Inside Bend Radius, inch (mm) 0.125 (3.175)
    Weight, pounds/100 ft. (kg/100 meters) 0.2 (0.3)
    ELECTRICAL CHARACTERISTICS
    Impedance, ohms 50+/-2.0
    Frequency Range DC-115
    Velocity of Propagation 77
    Capacitance, pF/ft. (pF/meter) 27
    Typical Insertion Loss, dB/100 ft. (dB/meter)
    and Average Power Handling, Watts CW at 20
    degrees Celsius and Sea level    		 Frequency Insertion Loss Power
    0.5 GHz
    1.0 GHz
    5.0 GHz
    10.0 GHz
    20.0 GHz    		 0.24 (0.78)
    0.34 (1.11)
    0.76 (2.50)
    1.09 (3.56)
    1.55 (5.08)    		 90
    63.6
    28.2
    19.9
    14
    Corona Extinction Voltage, VRMS @ 60 Hz 1000
    Voltage Withstand, VRMS @ 60 Hz 2000
    ENVIRONMENTAL CHARACTERISTICS
    Outer Conductor Integrity Temperature, Celsius Not Applicable
    Maximum Operating Temperature, Celsius 225
    MATERIALS
    Outer Conductor Tin plated 1100 Aluminum
    Dielectric LDPTFE
    Center Conductor SPC
    CUTAWAY


    ★★★★使用操作說明★★★★

    　
    Handformable Coaxial Cable, Aluminum Cable
    　
    Available products (select the part number for specification sheet):


    Solid PTFE Dielectric Cables
    Cable P/N
    		 Diameter
    (inches)    		 Insertion Loss
    (dB/ft@10GHz)    		 Impedance
    (ohms)    		 Max Frequency
    (GHz)
    UT-047-AL-TP 0.047 1.22 50 108
    UT-085A-AL-TP/AX50085 0.087 0.72 50 61
    UT-141A-AL-TP/AX50141 0.141 0.44 50 34
    UT-141-SA-AL-M17 0.141 0.44 50 34
    UT-141-SA-AL-TP-M17 0.141 0.44 50 34
    UT-250C-AL-TP/BX50250 0.250 0.28 50 19
    Low Loss Phase Stable PTFE Dielectric Cables
    Cable P/N
    		 Diameter
    (inches)    		 Insertion Loss
    (dB/ft@10GHz)    		 Impedance
    (ohms)    		 Max Frequency
    (GHz)
    UT-047C-AL-TP-LL 0.047 1.08 50 115
    UT-085C-AL-TP-LL 0.087 0.62 50 64
    UT-141C-AL-TP-LL 0.141 0.36 50 36
    M17 Cables
    Cable P/N
    		 Diameter
    (inches)    		 Insertion Loss
    (dB/ft@10GHz)    		 Impedance
    (ohms)    		 Max Frequency
    (GHz)
    UT-047-AL-TP 0.047 1.22 50 108
    UT-047C-AL-TP-LL 0.047 1.08 50 115
    UT-085A-AL-TP-TYPE 0.087 0.72 50 20
    UT-085C-AL-TP-LL 0.087 0.62 50 64
    UT-141A-AL-TP/AX50141 0.141 0.44 50 34
    UT-141C-AL-TP-LL 0.141 0.36 50 36
    UT-141-SA-AL-M17 0.141 0.44 50 34
    UT-141-SA-AL-TP-M17 0.141 0.44 50 34
    UT-250C-AL-TP/BX50250 0.250 0.28 50 19