LAPP-SKINTOP® MS-M ATEX BRUSH Faster and less complicated assembling than any other system工業級連接器

產品搜尋

分　類：
關鍵字：

首頁 > 歐規電纜線 & 配件LAPP/Igus/Nexans/Habia> LAPP-SKINTOP® Cable glands工業級連接器 > LAPP-SKINTOP® Cable glands nickel plated brass metric工業級連接器

LAPP-SKINTOP® MS-M ATEX BRUSH Faster and less complicated assembling than any other system工業級連接器

5346968

商品編號: LAPP-SKINTOP-MS-M-ATEX-BRUSH

LAPP-SKINTOP® MS-M ATEX BRUSH Faster and less complicated assembling than any other system工業級連接器

Faster and less complicated assembling than any other system; Optimal low-resistance 360° screen contact; Easy adjustment of installed cable; Easy disassembling; Anti static, cold impact resistant and safe

Application range

For EMC compliant earthing of the copper braiding and copper shaft sheath
Chemical and petrochemical industry
Plant engineering
Equipment group II / Category 2G+1D
Devices, machines of type of protection enhanced safety "e"

★★★★商品說明★★★★

Part number	Part designation / size	Outer-Ø mm from - to	Minimum Ø above braiding in mm	SW mm	Thread length D mm	Pieces / PU

SKINDICHT® SHVE-M ATEX
52107102	20 x 1,5	6,9-8,9	5	24	6.0	10

SKINTOP® MS-M ATEX BRUSH
52110023	25 x 1,5	9-17	6	29	8.0	10
52110024	32 x 1,5	11-21	8	36	9.0	1
52110025	40 x 1,5	19-28	10	45	9.0	1
52110026	50 x 1,5	27-35	14	54	10.0	1
52110027	63 x 1,5	34-45	20	67	15.0	1
52110028	63 x 1,5 plus	44-55	25	75	15.0	1
Footnote: Photographs are not to scale and do not represent detailed images of the respective products.

★★★★商品規格描述★★★★

Technical Data

Caution
Installation dimensions and tightening torques see instruction leaflet

Approvals
DNV for SKINDICHT® SHVE-M ATEX pending

Note
SKINDICHT® SHVE-M ATEX IBExU08ATEX1161 X Ex II 2G Ex e II Ex II 1D Ex tD A20 IP 6X
SKINTOP® MS-M ATEX BRUSH IBExU01ATEX1041 X Ex II 2G Ex e II Ex II 1D tD A20 IP6X

Material
SKINTOP® MS-M ATEX BRUSH Body: nickel plated brass Insert: special polyamide EMV-Brush: brass Seal: special elastomer O-Ring: special elastomer SKINDICHT® SHVE-M ATEX Body: nickel plated brass Earthing sleeve: brass Seal: special elastomer O-Ring: special elastomer

Tests
DIN EN 60079-0 DIN EN 60079-7

Degree of protection
IP 68

Range of temperature
SKINTOP® MS-M ATEX BRUSH -30°C up to +90°C SKINDICHT® SHVE-M ATEX -20°C up to +80°C

Design

Metric connection thread acc. to EN 50262

Note

Type SKINDICHT® SHVE-M ATEX with earthing sleeve for clamping of smaller cable diameters