1. LAPP-Accessories for INDUSTRIAL networking工業級網路連接線
    LAPP-Ethernet connector RJ45 & Crimping tool 工業級網路連接器材
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > LAPP-Accessories for INDUSTRIAL networking工業級網路連接線

    LAPP-UNITRONIC® LAN 500 MHz - CAT.6a 網路連接線 LAN cable for "Structured Cabling" - Class E
    看原圖
    		5326236




    商品編號: LAPP-UNITRONIC-CAT6a

    LAPP-UNITRONIC® LAN 500 MHz - CAT.6a 網路連接線 LAN cable for "Structured Cabling" - Class E

    UNITRONIC® LAN 500 MHz - CAT.6a  

     LAN cable for "Structured Cabling" - Class E

    Application range

    • Mainly used where the terminal density is very high, e.g. for wiring office, administration and development buildings in the tertiary area (floor wiring).



    ★★★★商品說明★★★★

    Part number Article designation Number of pairs and dimensions Outer diameter in mm max. Copper index kg/km Weight kg/km   
    PVC version
    2170143 STP/S PiMF 500 MHz CAT.6a 4 x 2 x AWG23/1 7,1 27 53
    2170144 STP/S PiMF 500 MHz CAT.6a (flexible for patchcable) 4 x 2 x AWG26/7 6,5 21 40
    2170145 STP/S PiMF 500 MHz CAT.6a DUPLEX 2 x (4 x 2 x AWG23/1) 7,1 x 14,6 54 106
    Halogen-free versions
    2170147 STP/S-H PiMF 500 MHz CAT.6a 4 x 2 x AWG23/1 7,1 27 53
    2170148 STP/S-H PiMF 500 MHz CAT.6a (flexible for patchcable) 4 x 2 x AWG26/7 6,5 21 40
    2170149 STP/S-H PiMF 500 MHz CAT.6a DUPLEX 2 x (4 x 2 x AWG23/1) 7,1 x 14,6 54 106

    Approvals (Norm references)

    • LAN CAT.6a cables from Lapp Kabel for "Structured cabling systems" meet the requirements in accordance with EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (Class D).
    • Class E in draft standard corresponds to CAT.6a

    Product features

    • Cables with auxiliary -H = halogen-free version
    • Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100 m in accordance with the ISO/IEC 11801 and EN 50173 standards (90 m in cable duct + 10 m in working area)
    • The impedance of these cables is 100 Ohm +/-15%