Technical Data

Dimensions 64 mm x 40 mm x 17 mm (LxWxH) Termination resistor Resistor combination integrated, connectable with slide switch Connection type Screwing Weight approx. 40 g Outgoing cable 90° Interfaces PROFIBUS-station:    SUB-D socket, 9-pole PROFIBUS-cable:    4 terminals for wires up    to 1,0 mm²

Degree of protection IP20 Current consumption max. 12.5 mA Transmission rate max. 12 MBit/s Pollution degree 2 Voltage consumption 4.75 .. 5.25 V DC (device is energized)) Permissble ambient conditions Surrounding air temperature:   0°C...+60°C Transport and storage temperature:   -25°C...+80°C Relative humidity:   max. 75% at +25°C

Design

• Sub-D plug, 9-pole
• Metalized housing
• Cable outlet 90°
• For cable diameter:   5.0 ... 8.0 mm
• Additional with programming/diagnostic interface (-PG): Sub-D socket, 9-pole

Approvals (Norm references)

• Sub-D connection / pin assignment in accordance with PROFIBUS
• EN 60079-0:2006, EN 60079-15:2005category 3G zone 2

Product features

• Screwing connection
• Switchable terminating resistor integrated
• Switch can also be operated when the connector is plugged and setting is clearly visible
• When being used as a through connector (two cable connections, node) the switch must be in the "OFF" position, if being as a terminal resistor (one cable connection) the switch must be in the "ON" position
• If the switch in in the "ON" position the outgoing bus cable is disconnected