ÖLFLEX® SERVO 9YSLCY-JB  

Technical Data

Core identification code Colours according to HD 308 S2 VDE 0293-308 Approvals UL Reg. for the USA: AWM Style 2570 or 20886, 1kV 80° VW-1 UL Reg. for CAN. AWM I/II A/B 1kV 80° FT 1 EU: based on VDE 0276, 0250, 0207 Specific insulation resistance 20 GOhm x km Conductor stranding Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius Occasional flexing: 15 x cable diameter Fixed installation: 4 x cable diameter

Rated voltage IEC U0/U: 600/1000V UL & CSA: 1000V Test voltage 4000 V Protective conductor This is distributed evenly in the gusset in protective conductors divided into three Range of temperature Flexing UL/CSA: -5°C up to +80°C   IEC: Type transparent -5°C up to +80°C, Type black: -5° up to 90°C Fixed installation: UL/CSA: -40°C up to +80°C    IEC: type transparent: -40°C up to +80°C type black: -40°C up to +90°C

Design

• Fine strands of bare copper wires
• Core insulation: Polyprophylene (PP)
• Cores twisted concentrically (this is respectively between the gusset in protective conductors divided into three)
• Over the cores aluminium foil
• Screening braid of tinned copper wires
• 4-core design: PVC -outer sheath, transparent
• 3+3 cond version: PVC -outer sheath, black, for outdoor use and direct burial

Approvals (Norm references)

• USA: Acc. NFPA79 Ed 08 in industrial machinery as part of a listed assembly only.

Product features

• Its low capacity design allows longer cable lengths between the frequency converter and motor.
• In dry, wet and damp interiors
• Type 9YSLCY black: Also for outdoors as well as direct burial, excluded in USA or Canada
• Flame retardant acc. IEC 60332-1-2 & CSA FT1