Space saving installation due to small cable diameters; High electrical performance due to 4kV test voltage
Application range
Plant engineering and construction Industrial machinery Air conditioning installations Power stationStage technique
Fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
Dry or damp interiors under medium mechanical load conditions
Technical Data
Core identification code Black with white numbers acc. to VDE 0293
Specific insulation resistance > 20 GOhm x cm
Conductor stranding Fine wire in accordance to VDE 0295 Class 5 / IEC 60228 Class 5
Minimum bending radius Occasional flexing: 15 x cable diameter Fixed installation: 4 x cable diameter
Rated voltage U0/U: 300/500 V
Test voltage 4000 V
Protective conductor G = with protective conductor GN/YE X = without protective conductor
Range of temperature Occasional flexing: -5°C up to +70°C Fixed installation: -40°C up to +80°C
VDE tested VDE Reg. No. 7030 for following sizes: up to 2,5 mm²: 2 - 65 cores starting at 4 mm²: 2 - 7 cores
Design
Fine strands of bare copper wires
PVC insulation LAPP P8/1
Cores twisted in layers
PVC outer sheath, grey (RAL 7001)
Approvals (Norm references)
Remark: A RoHS-non-compliant version is marketed under ÖLFLEX® 110 with VDE-REG.-Nr. 8067. To order this, please add appendix <1> to the below stated part numbers. This does not affect the above given further technical data or description.
.jpg)
