1. IGUS-Chainflex® 同轴电缆
    IGUS-Chainflex® 伺服电缆
    IGUS-Chainflex® 量測系統電纜
    IGUS-Chainflex® 动力电缆
    IGUS-Chainflex® 数据电缆
  2. 產品搜尋
    分 類:

    首頁 > > IGUS-Chainflex® 动力电缆

    IGUS-CF35 - TPE 动力电缆

      商品編號: IGUS-CF35

    IGUS-CF35 - TPE 动力电缆








    最小弯曲半径为: 7.5 xd

    Chainflex® CF35.UL motor cable TPE



    1. Highly flexible special conductor
    2. Energy conductor braided by high tensile strength core cord
    3. Gusset-filling, pressure extruded TPE inner jacket
    4. Highly bending-resistant braided copper shield
    5. With pressure-extruded TPE blend

    • For heavy duty uses
    • TPE outer jacket
    • Overall Shield
    • Oil-resistant
    • bio-oil-resistant
    • flame-retardant
    • UV-resistant
    • Hydrolysis-resistant and microbe-resistant


    Classification of the Chainflex® cable:
    Class 6.4.4
    6: Cables for continuous movement in E-Chains® for ultimate heavy-duty use, for radii from 5 x d, speed up to 10 m/s
    Travel distance:
    4: unsupported and sliding up to 400 m and above
    Resistance to oil:
    4: Oil-resistant according to EN 60811-2-1, resistant to organic oils in line with VDMA 24568 with Plantocut 8 S-MB from DEA

    Chainflex® CF35.UL motor cable TPE
    Cable design : 可選擇
    Protection cable : with earthed conductor green-yellow
    Outer diameter [mm]: 9.5
    Copper index [kg/km]: 82
    Weight [kg/km]: 146
    Part No. : 可選擇
    Note: The mentioned external diameters are maximum values and may tend toward lower tolerance limits.

    Temperature range moving -35 °C to +90 °C, minimum bending radius 7,5 x d
    Temperature range fixed -40 °C to +90 °C, minimum bending radius 4 x d
    v max. unsupported/gliding 10 m/s, 6 m/s
    a max. 80 m/s²
    Length of travel Unsupported and sliding travel distances up to 400 m and over, Class 4
    UV-resistant high
    Nominal voltage 600/1000 V (according to DIN VDE 0250)
    Test voltage 4000 V (according to DIN VDE 0281-2)
    Oil Oil resistant (according to DIN EN 60811-2-1), resistant to organic oils (according to VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4.
    flame-retardant According to IEC 332-1, CEI 20-35, FT1
    Silicon-free Free from silicon which can affect paint adhesion (following PV 3.10.7 – status 1992).
    conductor < 10 mm²: Strand conductor in especially flexible model made of bare copper wires (according to EN 60228)
    ≥ 10 mm²: Braided conductor wire (following EN 60228)
    Core insulation Mechanically high-quality, especially low capacitance TPE blend
    Core stranding Cores stranded in short pitches over a core guaranteeing tensile strength.
    Core identification Energy cable: Cores black with white numerals, one core green-yellow.
    1. core: U / L1 / C / L+
    2. core: V / L2
    3. core: W / L3 / D / L-
    4. core: 4 / N
    Inner jacket TPE mixture suited to the requirements in E-Chains®.
    Entire shield Extremely bending resistant, tin-plated braided copper shield. Cover about 70% linear, about 90% optical.
    Outer jacket Low-adhesion, especially abrasion-resistant and highly bending-resistant mixture in TPE base suited to the requirements in E-Chain® systems.
    Colour: black (similar to RAL 9005)
    UL/CSA Style 10492 and 21184, 1000 V, 80°C
    CEI Following CEI 20-35
    CE Following 2006/95/EG
    Lead-free Following EU guideline (RoHS) 2002/95/EC
    Cleanroom According to ISO Class 1. Outer jacket material corresponds to CF34.25.04, tested by IPA according to standard 14644-1
    Typical application areas
    • for maximum load requirements
    • Virtually unrestricted oil resistance, even against organic oils
    • Indoor and outdoor applications, UV-resistant
    • Especially for unsupported and gliding travels up to 400 m and more
    • storage and retrieval units for high-bay warehouses, machining units/machine tools, quick handling, clean room, semiconductor insertion, Ship to Shore, outdoor cranes, low-temperature applications