1. BLACKBOX-Buffers
    BLACKBOX-USB切換器
    BLACKBOX-印表機
    BLACKBOX-手動式-BNC RJ45 RJ11
    BLACKBOX-手動式-DB CAT6
    BLACKBOX-電子式
    BLACKBOX-電子式切換器類
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > BLACKBOX-電子式

    BLACKBOX-SW1000A Fiber Optic A/B Switches, Non-Latching, ST 2對1電子式ST光纖切換器
    看原圖
    		5223580




    商品編號: BLACKBOX-SW1000A

    BLACKBOX-SW1000A Fiber Optic A/B Switches, Non-Latching, ST 2對1電子式ST光纖切換器

    For ultra-secure, critical-circuit switching, use these micro-mirror optical devices.

    相關商品

    SW1000A 2對1電子式ST光纖切換器 Fiber Optic A/B Switches, Non-Latching, ST 
    SW1001A 3對1電子式ST光纖切換器 Fiber Optic A/B/C Switch, Latching, ST 
    SW1002A 2對1電子式ST光纖切換器 Fiber Optic A/B Switch, Latching, ST 
    SW1003A 機架式2對1電子式ST光纖切換器 Fiber Optic A/B Switches, Non-Latching with Off Position, Rackmount, ST 
    SW1004A 機架式3對1電子式ST光纖切換器 Fiber Optic A/B/C Switch, Latching, ST, Rackmount 
    SW1005A 4對1電子式ST光纖切換器 Fiber Optic A/B/C/D Switch, Latching, ST 
    SW1006A 4對1電子式ST光纖切換器 Fiber Optic A/B/C/D Switch, Non-Latching, ST 
    SW1007A 3對1電子式ST光纖切換器 Fiber Optic A/B/C Switch, Non-Latching, ST 
    SW1008A 2對1電子式SC光纖切換器 Fiber Optic A/B Switches, Latching, SC 
    SW1009A 2對1電子式SC光纖切換器, Loopback Fiber Optic A/B Switches, Latching with Loopback, SC 
    SW1010A 2對1電子式ST光纖切換器, Loopback Fiber Optic A/B Switches, Latching with Loopback, ST 
    SW1011A 2對1電子式SC光纖切換器, Loopback, 附安全鎖 Fiber Optic A/B Switches, Non-Latching with Loopback, Keylock, SC 



    ★★★★商品說明★★★★

    Description

    Fiber Optic A/B Switch, Non-Latching, ST


    Quick Facts

  3. No optical-to-electrical conversion between fiber connections. Instead, the switches use internal mirrors to optically move data between ports—technology that’s trusted and time tested!

    4. 　

    Further Details

  4. Simple to use. To route signals, just turn a knob on the front panel.
  5. Ideal for government, healthcare, financial, or other applications where a private, data-sensitive network connects to a publicly accessible network.
  6. For reliable switching in mission-critical environments, the micro-mirrors are bonded to precise positioning servos.
  7. Enable you to connect a single workstation to two or more networks or remote devices.
  8. Latching switches latch mirror movement mechanically into a selected position and hold it there without the need for continuous electrical power.
  9. All non-latching versions except for the SW1003A fall back to C-to-A position if power is lost (the SW1003A falls back to the OFF position).
  10. The OFF position on the SW1003A also prevents host-to-remote device communications.
  11. Models with loopback enable you to test an idle fiber link from a central office to ensure that the circuit is operating correctly.
  12. Operate transparently to signal rates, formats, and wavelengths, and don’t require an upgrade when your data protocols change or speeds increase.
  13. Work with 62.5-/125-micron multimode.
  14. Universal 100–240-VAC power supply.
    There’s a reason why these types of manual switches continue to be the switches of choice for networking professionals everywhere: The tried-and-true optical switches perform as promised year after year.

    They’re reliable because they use micro-mirrors instead of electronics to route data signals from one fiber optic port to the next. And unlike conventional electronic switches, there are no complex and vulnerable electronic circuits to monitor and protect from intrusion, component failure, or interference.

    The switches are available in latching and non-latching models. The optical mirror movement on the latching versions maintain the selected position even when there’s a power failure.

    You can also order an A/B switch with unique loopback capabilities. Using loopbacks, you can verify the integrity of your backup fiber link while still connected to your primary fiber link. This is especially useful in failover applications where you want to continuously test the “unused” circuit to ensure that it’s available if needed.

    15. Technical Specifications for Fiber Optic A/B Switches, Non-Latching, ST:

    Compatibility — 62.5-/125-micron multimode fiber
    Crosstalk — -45 dB (typical) per FOTP-42
    MTBF — 100,000 hours or 1,000,000 cycles
    Optical Loss — 0.5 dB (typical) at 1300 nm per FOTP-34 method B
    Sensitivity — 750 to 1440 nanometers
    Switching Speed — Typical: 5 msec;
    Maximum: 10 msec
    CE Approval — Yes
    Connectors — Fiber ports: SW1000A, SW1002A–SW1003A, SW1010A: (3) pairs of ST®;
    SW1008A–SW1009A: (3) pairs of SC
    Power: All: (1) 3.5-mm input
    Power — Input: 100–240 VAC, 50–60 Hz, autosensing;
    Output: 5 VDC
    Size — SW1000A, SW1002A, SW1008A: 2.5"H x 8"W x 6.3"D (6.4 x 20.3 x 16 cm);
    SW1003A: 3.5"H x 19"W x 6.5"D (8.9 x 48.3 x 16.5 cm);
    SW1009A–SW1010A: 2.5"H x 8.1"W x 10.8"D (6.4 x 20.6 x 27.4 cm)
    Weight — SW1000A, SW1002A, SW1008A: 4 lb. (1.8 kg);
    SW1003A: 7 lb. (3.2 kg);
    SW1009A–SW1010A: 2.5 lb. (1.1 kg)